User manual SONY CMT-BX1

[. . . ] Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. [. . . ] folder levels (the tree structure of files) is 8. Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Incompatible MP3 discs may produce noise or interrupted audio or may not play at all. Notes on playing multisession discs repeatedly). Press the following buttons (or press FUNCTION Press CD on the remote. AUDIO IN . Power Connect the power cord to a wall socket. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). Wall socket To select CD Tuner Component (connected using an audio cord) If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and other sessions are not played back. A disc with a mixed CD format is recognized as a CD-DA (audio) disc. Brown side for other regions White side for North American model Other Operations Creating your own program (Program Play) 1 Press CD to select the CD function. 2 Press PLAY MODE repeatedly until "PGM" appears while the player is stopped. Troubleshooting Using the Timers The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. Messages CD OVER: You have reached the end of the disc while pressing during playback or pause. COMPLETE: The preset operation ended normally. NO DISC: There is no disc in the system, or you have loaded a disc that cannot be played. NO STEP: All of the programmed tracks or files have been erased. PUSH SELECT: You tried to set the clock or timer during timer operation. PUSH STOP: You pressed PLAY MODE during playback. READING: The system is reading information of the disc. SET CLOCK: You tried to select the timer when the clock is not set. SET TIMER: You tried to select the timer when the Play Timer is not set. STEP FULL: You tried to program more than 26 tracks or files (steps). TIME NG: The Play Timer start and end times are set to the same time. Should any solid object or liquid get into the system, 1 Make sure the power cord and speaker cords are correctly and firmly connected. unplug the system, and have it checked by qualified personnel before operating it again. The AC power cord can be changed only by a qualified service facility. 2 Find your problem in the checklist below, and take On placement Do not place the system in an inclined position or in Sleep Timer: the indicated corrective action. If the issue persists, contact your nearest Sony dealer. 3 Press / repeatedly until the desired track or file number appears. When programming files, press +/ repeatedly to select the desired folder, and then select the desired file. You can fall asleep to music. This function works even if the clock is not set. [. . . ] 3. 4 kg Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/AM loop antenna (1)/FM lead antenna (1) Design and specifications are subject to change without notice. 1 Tune in any AM station, and then turn off the system. 2 While holding down TUNER/BAND , press . All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. To improve tuner reception Turn off CD player power by using the CD power management function. By default, CD power is turned on. 1 Press FUNCTION repeatedly to select the CD function, and then turn off the system. 2 After "STANDBY" stops flashing, press on the unit while holding down /CANCEL on the unit. With CD player power turned off, disc access time is increased. [. . . ]