User manual SONY CMT-BX20I

[. . . ] 3-293-641-11(1) Notice for the customers in the U. S. A. CAUTION The following CAUTION marking is located on the rear exterior. Micro HI-FI Component System Operating Instructions The following FCC statement applies only to the version of this model manufactured for sale in the U. S. A. Other versions may not comply with FCC technical regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] The system can only play MP3 files that have a file extension of ". MP3". If there are files on the disc that have the ". MP3" file extension, but that are not MP3 files, the unit may produce noise or may malfunction. The maximum number of: folders is 255 (including the root folder). MP3 files and folders that can be contained on a single disc is 512. folder levels (the tree structure of files) is 8. Compatibility with all MP3 encoding/writing software, recording device, and recording media cannot be guaranteed. Adjust the volume. On placement Do not place the system in an inclined position or in Speaker 1 Make sure the power cord and speaker cords are correctly and firmly connected. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. The sound is distorted. 2 Press PLAY MODE repeatedly until "PGM" appears 3 Press / repeatedly until the desired track or file number appears. When programming files, press +/ repeatedly to select the desired folder, and then select the desired file. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. If you select "AUTO, " the system automatically turns off after the current disc stops or in 100 minutes. If the STANDBY indicator flashes Turn down the volume. Set the "EQ" setting of the iPod to "Off " or "Flat. " Play Timer: You can wake up to CD, tuner or iPod at a preset time. Make sure you have set the clock. 1 Prepare the sound source. Selected track or file number Total playing time of program (including selected track or file) Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or file, create your own program. Immediately unplug the power cord, and check the following items. If your system has a voltage selector, is the voltage selector set to the correct voltage? Are you using only the supplied speakers? Is anything blocking the ventilation holes on the top or back of the system? Is the iPod connector short-circuited?After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. The iPod cannot be charged. Make sure the iPod is connected securely. locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. [. . . ] 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. 6 To call up a preset radio station, press TUNING reception, and then set up the antenna again. Keep the antenna away from the speaker cords and the power cord to avoid picking up noise. Connect a commercially available external antenna. [. . . ]