User manual SONY CMT-BX30R

[. . . ] 3-293-639-11(1) Micro HI-FI Component System Operating Instructions CMT-BX30R © 2008 Sony Corporation WARNING To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. [. . . ] This function works even if the clock is not set. 5 6 Use the same procedure as in step 4 to set the time to stop playing. Press / repeatedly until the desired sound source appears, and then press ENTER . The display shows the timer settings. Press SLEEP repeatedly. If you select "AUTO, " the system automatically turns off after the current disc or USB device stops or in 100 minutes. PlayTimer: You can wake up to CD, tuner or optional USB device at a preset time. Use buttons on the remote to control the Play Timer. Make sure you have set the clock. 7 Press / to turn off the system. The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play. To activate or check the timer again 1 Press CLOCK/TIMER SELECT , press / repeatedly until "PLAY SEL?" appears, and then press ENTER . Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or file, create your own program (page 22). To cancel the timer Repeat the same procedure as above until "TIMER OFF?" appears, and then press ENTER . 2 3 To change the setting Start over from step 1. Tip The Play Timer setting remains as long as the setting is not canceled manually. Press CLOCK/TIMER SET . Press / repeatedly to select "PLAY SET?, " and then press ENTER . "ON TIME" appears, and the hour indication flashes. 4 Set the time to start playing. Press / repeatedly to set the hour, and then press ENTER . Use the procedure above to set the minutes. GB Others Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. Severehumornoise. Move the system away from sources of noise. Connect the system to a different wall socket. Install a noise filter (available separately) to the power cord. Remove any obstacles between the remote and the remote sensor on the unit, and position the unit away from fluorescent lights. Point the remote at the system's sensor. TheSTANDBYindicatorremainslit afterunpluggingthepowercord. The STANDBY indicator may not turn off immediately after unplugging the power cord. The indicator will turn off after about 40 seconds. 2 Find your problem in the checklist Others IftheSTANDBYindicatorflashes Immediately unplug the power cord, and check the following items. [. . . ] Onplacement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. Others Continued 1GB If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. Onheatbuildup Heat buildup on the unit during operation is normal and is not cause for alarm. [. . . ]