User manual SONY CMT-BX5

[. . . ] 3-095-504-23(1) Micro HI-FI Component System Operating Instructions CMT-BX5 CMT-BX3 © 2007 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. Connect the unit to an easily accessible AC outlet. [. . . ] Play Timer: You can wake up to CD, tuner or optional USB device at a preset time. Use buttons on the remote to control the Play Timer. Make sure you have set the clock. Press / to turn off the system. The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play. To activate or check the timer again Press CLOCK/TIMER SELECT , press / repeatedly until "PLAY SEL" appears, and then press ENTER . 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific track or file, create your own program (page 18). To cancel the timer Repeat the same procedure as above until "TIMER OFF" appears, and then press ENTER . To change the setting Start over from step 1. Tip The Play Timer setting remains as long as the setting is not canceled manually. 2 3 Press CLOCK/TIMER SET . Press / repeatedly to select "PLAY SET, " and then press ENTER . "ON" appears, and the hour indication flashes. 4 Set the time to start playing. Press / repeatedly to set the hour, and then press ENTER . Use the procedure above to set the minutes. 20GB Others Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. Connect the system to a different wall socket. Install a noise filter (available separately) to the power cord. Remove any obstacles between the remote and the remote sensor on the unit, and position the unit away from fluorescent lights. Point the remote at the system's sensor. Move the remote closer to the system. 2 Find your problem in the checklist CD/MP3 player The sound skips, or the disc will not play. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. Play does not start from the first track. Press PLAY MODE repeatedly until both "PGM" and "SHUF" disappear to return to normal play. Starting playback takes more time than usual. The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. [. . . ] The AC power cord can be changed only by a qualified service facility. On placement Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result. If the system is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the lens inside the CD player, and cause the system to malfunction. [. . . ]