User manual SONY CMT-BX70DBI

[. . . ] 3-293-641-31(1) Notice for the customer in the countries applying EU Directives materials will help to conserve natural resources. Micro HI-FI Component System Operating Instructions The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses given in separate service or guarantee documents. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] The clock settings are lost when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off, press DISPLAY . The clock is displayed for about 8 seconds. To connect an optional component 3 Start playback. Press (play) (or iPod (play/pause) on the unit) . Connect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). Turn down the volume on the system, and then select the AUDIO IN function. Power Stop playback Select a folder on an MP3 disc Select a track or file Find a point in a track or file Select Repeat Play Connect the power cord to a wall socket. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). To control the iPod To run the DAB Automatic Scan Brown side for other regions or FM/DAB lead antenna (Extend it horizontally. ) To DAB external antenna (not supplied) Wall socket When you turn on the system for the first time after you purchase the system, DAB Automatic Scan starts automatically and creates a list of available services. If you want to run the DAB Automatic Scan again, perform the procedure below. 1 Press DAB AUTO SCAN on the unit. "Auto Scan?" and "Push Enter" appear. or 75-ohm coaxial cable with F male type connector (not supplied) / (go back/go forward) . Hold down / (rewind/ fast forward) during playback, and release the button at the desired point. REPEAT repeatedly until "REP" or "REP1" appears. You can control your iPod with the following buttons on the remote or unit. To Pause playback Press (pause) (or iPod (play/pause) on the unit) or (stop) . You can scroll up or down the iPod menus much like the Click Wheel operations of the iPod or the drag up-or-down operations of the iPod touch. To fast-forward or fastrewind, hold down the button. Scroll up/down the iPod menus 2 Press (enter) . Depending on the DAB services available in your area, scanning may take a few minutes. To change the play mode * When playing a CD-DA disc, (SHUF) Play performs the same operation as normal (shuffle) play. Press PLAY MODE repeatedly while the player is stopped. You can select normal play (" " for all MP3 files in the folder on the disc), shuffle play ("SHUF" or " SHUF*"), or program play ("PGM"). Select a track or chapter of audiobook/podcast Choose the selected item Notes on Repeat Play When scanning is complete, a list of available services is created. All tracks or files on a disc are played repeatedly up to five times. "REP1" indicates that a single track or file is repeated until you stop it. / (enter) (or ENTER on the unit) . You can choose the selected item much like the center button on the iPod or the touch operation of the iPod touch. Other Operations Creating your own program (Program Play) 1 Press FUNCTION +/ (or FUNCTION on the unit) repeatedly to select the CD function. while the player is stopped. Troubleshooting Using the Timers The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. Use buttons on the remote to use the timer functions. To improve tuner reception 1 On placement Do not place the system in an inclined position or in iPodsection 1 Make sure the power cord and speaker cords are correctly and firmly connected. Turn off CD player power by using the CD power management function. Press FUNCTION +/ (or FUNCTION on the unit) repeatedly to select the CD function, and then turn off the system. Compatible iPod models: 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. 2 After "STANDBY" stops flashing, press on the 2 Press PLAY MODE repeatedly until "PGM" appears 3 Press / repeatedly until the desired track or file number appears. When programming files, press +/ repeatedly to select the desired folder, and then select the desired file. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. If you select "AUTO, " the system automatically turns off after the current disc stops or in 100 minutes. If the STANDBY indicator flashes Play Timer: You can wake up to CD, tuner or iPod at a preset time. [. . . ] a disc recorded in multisession mode. System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44. 6µW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Frequency response: 20 Hz 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 90 dB 2 Press TUNER MEMORY . Repeat the same procedure as above until "TIMER . OFF?" appears in step 3, and then press Tunersection To change the setting Start over from step 1. Preset number Note on the iPod touch user The Play Timer may not be activated depending on the status of the connected iPod touch. a disc that has not been finalized (a disc to which data a disc that has many folders. can be added). DAB tuner section: Frequency range* Band-III: 174. 928 (5A) 239. 200 (13F) MHz * For details, see "DAB frequency table" below. Antenna: FM/DAB lead antenna Antenna terminal: 75 ohms, F female FM stereo, FM/AM superheterodyne tuner FM tuner section: Tuning range: 87. 5 108. 0 MHz (50 kHz step) Antenna: FM/DAB lead antenna Antenna terminals: 75 ohms unbalanced Intermediate frequency: 10. 7 MHz AM tuner section: Tuning range: 531 1, 602 kHz (with 9 kHz tuning interval) Antenna: AM loop antenna, external antenna terminal Intermediate frequency: 450 kHz DAB frequency table (Band-III) Frequency 174. 928 MHz 176. 640 MHz 178. 352 MHz 180. 064 MHz 181. 936 MHz 183. 648 MHz 185. 360 MHz 187. 072 MHz 188. 928 MHz 190. 640 MHz 192. 352 MHz 194. 064 MHz 195. 936 MHz 197. 648 MHz 199. 360 MHz 201. 072 MHz 202. 928 MHz 204. 640 MHz 206. 352 MHz 208. 064 MHz Label 5A 5B 5C 5D 6A 6B 6C 6D 7A 7B 7C 7D 8A 8B 8C 8D 9A 9B 9C 9D Frequency 209. 936 MHz 211. 648 MHz 213. 360 MHz 215. 072 MHz 216. 928 MHz 218. 640 MHz 220. 352 MHz 222. 064 MHz 223. 936 MHz 225. 648 MHz 227. 360 MHz 229. 072 MHz 230. 784 MHz 232. 496 MHz 234. 208 MHz 235. 776 MHz 237. 488 MHz 239. 200 MHz Label 10A 10B 10C 10D 11A 11B 11C 11D 12A 12B 12C 12D 13A 13B 13C 13D 13E 13F Tuner Severe hum or noise, or stations cannot be received. [. . . ]