User manual SONY CMT-BX77DBI

[. . . ] Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. [. . . ] up to 8 characters of service name, up to 128 characters of DLS (Dynamic Label Segment) and up to 16 characters of ensemble label. 3 Start playback. Press (play) (or CD (play/pause) on the unit) . To Pause playback Press (pause) (or CD (play/ pause) on the unit) . +/ (select folder) . Make sure the metal leads (not the part covered with vinyl insulation) are securely inserted into the speaker jacks. 3 Set the time. Press / repeatedly to set the hour, and then press (enter) . Use the same procedure to set the minutes. The clock settings are lost when you disconnect the power cord or if a power failure occurs. To display the clock when the system is off, press DISPLAY . The clock is displayed for about 8 seconds. Using optional audio components To connect an optional headphones Connect headphones to the PHONES jack on the unit. To connect an optional component Stop playback Select a folder on an MP3 disc Select a track or file Find a point in a track or file Select Repeat Play 3 Start playback. Press (play) (or iPod (play/pause) on the unit) . Connect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). Turn down the volume on the system, and then select the AUDIO IN function. To run the DAB Automatic Scan or FM/DAB lead antenna (Extend it horizontally. ) When you turn on the system for the first time after you purchase the system, DAB Automatic Scan starts automatically and creates a list of available services. If you want to run the DAB Automatic Scan again, perform the procedure below. or 75-ohm coaxial cable with F male type connector (not supplied) 1 Press DAB AUTO SCAN on the unit. "Auto Scan?" and "Push Enter" appear. Wall socket To DAB external antenna (not supplied) Power 2 Press Connect the power cord to a wall socket. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor). (enter) . Depending on the DAB services available in your area, scanning may take a few minutes. / (go back/go forward) . Hold down / (rewind/ fast forward) during playback, and release the button at the desired point. REPEAT repeatedly until "REP" or "REP1" appears. To control the iPod You can control your iPod with the following buttons on the remote or unit. To Pause playback Press (pause) (or iPod (play/pause) on the unit) or (stop) . You can scroll up or down the iPod menus much like the Click Wheel operations of the iPod or the drag up-or-down operations of the iPod touch. To fast-forward or fastrewind, hold down the button. Scroll up/down the iPod menus To change the play mode When scanning is complete, a list of available services is created. * When playing a CD-DA disc, (SHUF) Play performs the same operation as normal (shuffle) play. Press PLAY MODE repeatedly while the player is stopped. You can select normal play (" " for all MP3 files in the folder on the disc), shuffle play ("SHUF" or " SHUF*"), or program play ("PGM"). Select a track or chapter of audiobook/podcast Other Operations Creating your own program (Program Play) 1 Press FUNCTION +/ (or FUNCTION on the unit) repeatedly to select the CD function. while the player is stopped. Troubleshooting Using the Timers The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. Use buttons on the remote to use the timer functions. To improve tuner reception 1 On safety Completely disconnect the power cord (mains lead) 1 Make sure the power cord and speaker cords are correctly and firmly connected. Turn off CD player power by using the CD power management function. Press FUNCTION +/ (or FUNCTION on the unit) repeatedly to select the CD function, and then turn off the system. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. 2 After "STANDBY" stops flashing, press on the 2 Press PLAY MODE repeatedly until "PGM" appears 3 Press / repeatedly until the desired track or file number appears. When programming files, press +/ repeatedly to select the desired folder, and then select the desired file. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. [. . . ] a disc recorded in multisession mode. General 2 Press TUNER MEMORY . Repeat the same procedure as above until "TIMER . OFF?" appears in step 3, and then press Inputs Power requirements: 230 V AC, 50/60 Hz Power consumption: 63 watts Dimensions (w/h/d) (excl. 215 mm × 140 mm × 298 mm Mass (excl. 3. 9 kg Supplied accessories: Remote Commander (1)/R6 (Size AA) batteries (2)/AM loop antenna (1)/FM/DAB lead antenna (2)/Speaker cords (2) Design and specifications are subject to change without notice. Outputs To change the setting Start over from step 1. Preset number Notes for the iPod user a disc that has not been finalized (a disc to which data a disc that has many folders. can be added). CDplayersection 3 Press +/ repeatedly to select your desired Make sure the iPod is not playing when using the Play Timer. [. . . ]