User manual SONY CMT-CPX11

[. . . ] The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] Each time you press the button, the display changes cyclically as follows: The start time, the stop time and the sound source appear in turn, then the original display returns. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 11) and set the clock (see "Setting the clock" on page 7). Until "PLAY SEL" appears, then press ENTER. Until "TIMER OFF" appears, then press ENTER. /> repeatedly until "REC SET" appears, then press ENTER. Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). â· If the system is on about 15 seconds before the preset time, Play Timer will not be activated. â· You cannot use the optional component connected to MD/VIDEO IN jacks as the sound source for Play Timer. "ON" appears with a flashing hour indication. /> repeatedly to set the hour, then press ENTER. Set the time to stop recording following the same procedure as step 4. Press DIRECTION on the unit repeatedly until g appears to record on one side or h (or j) to record on both sides. If you select both sides recording or front side recording, press N (or TAPE nN on the unit) until "N" appears. If you record on the reverse side, press N (or TAPE nN on the unit) again until "n" appears. Until "REC SEL" appears, then press ENTER. Until "TIMER OFF" appears, then press ENTER. Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). â· If the system is on about 15 seconds before the preset time, Timer Recording will not be activated. The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. You can check the playing time and remaining time of the current track or that of the disc. When a CD-TEXT disc or a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. [. . . ] â· If you continuously use this system at a high volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. This system can play CD-R/CD-RW discs edited by the user. However, note that playback of some discs may not be possible depending on the recording device used for recording or the disc condition. [. . . ]