User manual SONY CMT-DH3

[. . . ] 3-097-194-15(1) Micro HI-FI Component System Operating Instructions CMT-DH3 © 2007 Sony Corporation WARNING To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. [. . . ] 2) When you set "TRACK SELECTION" to "AUTO, " the language may change. The "TRACK SELECTION" setting has higher priority than the "AUDIO" settings in "LANGUAGE SETUP". However, depending on the disc, this function may not be performed. 3) AUDIO DRC can only be performed with Dolby Digital sources. 1) GB Disc Tuner Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. If "TUNED" does not appear and the scanning does not stop, press TUNING +/ repeatedly to tune in the station you want. When you tune in a station that provides RDS services, the station name appears on the display. (European model only) 3 Adjust the volume. Press VOLUME +/ . Listening to FM or AM To stop automatic scanning Press . 1 Press FUNCTION +/ repeatedly to select "TUNER FM" or "TUNER AM" (or press TUNER/ BAND on the unit repeatedly to select "FM" or "AM"). Press and hold TUNING +/ until the frequency indication changes and then release. Scanning stops automatically when a station is tuned in and "TUNED" lights up in the display. When a FM stereo program is tuned in, "ST" lights up in the display. To change the AM tuning interval 2 The factory setting for AM tuning interval is 9 kHz (or 10 kHz, for some areas, this function is not available on the European and Russian models). Use buttons on the unit. 1 Press TUNER/BAND on the unit repeatedly to select "AM. " 2 Press / to turn off the system. 4 While the clock is displayed, hold down TUNER/BAND and then press / to turn on the system. "AM 9k Step" or "AM 10k Step" appears in the display. When you change the interval, all the AM preset stations are erased. 60GB Tips improve broadcast reception, adjust the To supplied antennas, or connect an external antenna. When an FM stereo program has static noise, press REPEAT/FM MODE repeatedly until "MONO" lights up in the display. There will be no stereo effect, but the reception will improve. 4 5 6 Press PRESET +/ repeatedly to select the preset number you want. Press ENTER . "Complete!" appears in the display. The station is stored. Listening to preset radio station Repeat steps 1 to 6 to store other stations. You can preset up to 20 FM stations and 10 AM stations. The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs. Tuner 1 2 3 Tune in the desired station (see "Listening to FM or AM" (page 60)). Press DVD/USB/TUNER MENU . "Memory?" flashes in the display. 7 To listen to a preset station, press PRESET +/ repeatedly to select the preset station you want. You can also press the numeric buttons , then press ENTER to select a preset station. Press ENTER . A preset number flashes in the display. The stations are stored from preset number 1. To cancel presetting Press DVD/USB/TUNER MENU . Preset number 1GB USB Device 2 Connect an optional USB device (Digital music player or USB storage media) to the (USB) port as shown below. Listening to music of an USB device You can connect an optional USB device (Digital music player or USB storage media) to the (USB) port on the unit and listen to music stored in the USB device. See "Playable USB devices" (page 103) for a list of USB devices that can be connected to this system. The audio formats that can be played back by this system are as follows: ATRAC/MP3*/WMA*/AAC* USB device (Digital music player or USB storage media) * Files with copyright protection (Digital Rights Management) cannot be played by this system. Files downloaded from an online music store may not be played by this system. 1 Select the USB function. Press FUNCTION +/ repeatedly to select "USB". When USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. [. . . ] Film based DVD VIDEOs contain the same images (24 frames per second) that are shown at movie theaters. Video based DVD VIDEOs, such as television dramas or sitcoms, displays images at 30 frames (or 60 fields) per second. Interlace format (Interlaced scanning) The Interlace format is the NTSC standard method for displaying TV images at 30 frames per second. Each frame is scanned twice-alternately between the even numbered scanning lines and then odd numbered scanning lines, at 60 times per second. DVD+RW A DVD+RW (plus RW) is a recordable and rewritable disc. DVD+RWs use a recording format that is comparable to the DVD VIDEO format. Multi-angle function Various angles, or viewpoints of the video camera, for a scene are recorded on some DVD VIDEOs. Additional Information File A JPEG image file or a DivX video file recorded on a DATA CD or DATA DVD. [. . . ]