User manual SONY CMT-DX400

[. . . ] To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. [. . . ] Or > on the remote repeatedly to find the ending point of the portion to be erased (point B) while monitoring the sound, then press ENTER/YES on the remote. You can shift the point by 1/86 second (1 frame) intervals. Repeatedly until the desired track number to move appears, then press ENTER/YES on the remote. To shift the point by minute or second intervals in steps 6 and 8, press m or M on the remote repeatedly to flash minute, second, or frame indication, then press . You can use this function to mark track numbers after recording. You can also use this funciton when recording from tapes or radio programs and track numbers are not marked automatically, and want to mark tracks. The total number of tracks increases by one and all the tracks following the divided ones are renumbered. Example: Dividing track 2 into two tracks. Repeatedly until the new track position appears. Original track number New track position When you move a track to a track number that is registered into a group, the moved track is reregistered into the group. In addition, if you move a track that is registered into a group to a track number that is not registered into a group, the group registration of the moved track is released. An amount of time that is roughly equal to or longer than the playback time of the track is required when recording over the track. Repeatedly until the track number you want to change the recording level appears, then press ENTER/YES on the remote. You cannot change the recording level of the tracks recorded in MDLP mode. Repeatedly changing the recording level results in poor sound quality. The recording level will not return to the exact original level once the recording level has been changed even if it returned to the original level. The recording level cannot be changed while the timer is activated. Repeatedly until the track number you want to change the recording level appears, then press ENTER/YES on the remote. The system plays the portion that will be recorded over using Fade-in or Fade-out Recording. You can set the time at any value between 1. You cannot set the time longer than the track. F Edit: ** %" appears while the track is being recorded. [. . . ] Recording is done in minimum units of 2 seconds* each, no matter how short the material. The recorded contents may be shorter than the maximum recording capacity. In Monaural or LP2 Stereo mode: about 4 seconds In LP4 Stereo mode: about 8 seconds The sound may drop-out while searching the edited tracks Tracks created through editing may exhibit sound dropout during searching because high-speed playback requires time to search for the position on the disc when the tracks are not in order. " appears before the maximum number of tracks (255) is reached Fluctuations in emphasis within tracks are sometimes interpreted as track intervals, increasing the track count and causing "Disc Full! [. . . ]