User manual SONY CMT-FX205

[. . . ] Unit Getting Started Listening to the radio 1 Select "TUNER FM" or "TUNER AM. " Press TUNER/BAND repeatedly. To select a memory on the USB device 2 Perform tuning. For automatic scanning Press TUNING MODE repeatedly until "AUTO" appears, and then press +/ . Scanning stops automatically when a station is tuned in, and "TUNED" and "ST" (for stereo programs only) light up in the display. If the USB device has more than one memory (for example, internal memory and a memory card), you can select which memory to use and then start playback. You cannot select a memory during playback. Make sure to select a memory before starting playback. [. . . ] volume label if it exists on the MP3 disc or the USB device (only when normal play mode is selected and the player or the USB device is stopped). If "PROTECT" appears on the display The USB device is not connected correctly. Turn off the system, then reconnect the USB device. Immediately unplug the power cord, and check the following items after "PROTECT" disappears. Are the + and speaker cords short-circuited? Is anything blocking the ventilation holes of the system?After you have checked these above items and found to be all right, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. There is noise, skipping, or distorted sound. 2 Press to turn off the system. 3 After "STANDBY" stops flashing, press DISPLAY Discs that this system CANNOT play Turn off the system, then reconnect the USB device. The music data itself contains noise, or the sound is distorted. Noise may have been entered when creating music data due to the conditions of the computer. The bit rate used when encoding the files was low. Send files encoded with higher bit rates to the USB device. 4 Program the selected track or file. Press ENTER to enter the selected track or file. General The system does not turn on. Is the power cord plugged in? "READING" is displayed for an extended time, or it takes a long time before playback starts. The reading process can take a long time in the following cases. There are many folders or files on the USB device. The internal memory is fragmented. to display the clock and then press while holding down , until "CD/USB PWR OFF" appears. With CD player/USB device power turned off, access time is increased. In addition, when the tuner function is selected, power is not supplied to the USB device, so it is not recognized and charged even if connected. To turn on CD player/USB device power, repeat the procedure until "CD/USB PWR ON" appears. To reset the system to factory settings Notes on the display information 5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. 6 To play your program of tracks or files, press . The program remains available until you open the CD compartment. To play the same program again, press . To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the player is stopped. To delete the last track or file of the program Press CLEAR while the player is stopped. To view program information, such as total track number of the program Press DISPLAY repeatedly. Characters that cannot be displayed appear as "_". The following are not displayed; total playing time for an MP3 disc and a USB device. The following are not displayed correctly; elapsed playing time of an MP3 file encoded using VBR (variable bit rate). folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. The following are displayed; remaining playing time for a track. ID3 tag information for MP3 files when ID3 version 1 and version 2 tags are used (ID3 version 2 tag information display has priority when both ID3 version 1 and version 2 tags are used for a single MP3 file). [. . . ] 158 mm × 240 mm × 225. 5 mm Mass (excl. 2. 1 kg Supplied accessories: Remote Commander (1), FM lead/AM loop antenna (1) Design and specifications are subject to change without notice. 5 Use the same procedure as in step 4 to set the time to stop playback. EQ . 6 Select the sound source. Press / repeatedly until the desired sound source appears, then press ENTER . Play does not start from the first track. On the speaker system Return to Normal Play by pressing PLAY MODE repeatedly until both "PGM" and "SHUF" disappear. 7 Turn off the system. Press . The system turns on 15 seconds before the preset time. [. . . ]