User manual SONY CMT-FX350I

[. . . ] Unit Getting Started Listening to the radio 1 Select "DAB" or "TUNER FM. " Press FUNCTION +/ repeatedly. Playing the iPod 1 Select the iPod function. Press FUNCTION +/ repeatedly. 2 Perform tuning. For automatic scanning Press TUNING MODE repeatedly until "AUTO" appears, and then press + / . Scanning stops automatically when a station is tuned in, and "ST" (for stereo programs only) lights up in the display. 2 Place the iPod. 3 Start playback. Press . To control the iPod To Pause playback Scroll up/down the iPod menus Select a track or chapter of audiobook/ podcast Choose the selected item Find a point in a track or chapter of audiobook/ podcast Return to the previous menu or select a menu Press / . / . If the scanning for an FM station does not stop, press to stop scanning, then perform manual tuning (below). [. . . ] OVER : You have reached the end of the disc while pressing during playback or pause. PUSH STOP : You pressed PLAY MODE during playback. TIME NG : The Play Timer start and end times are set to the same time. Specifications Mainunit Amplifiersection UK model: DIN power output (rated): 4 watts + 4 watts (4 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 5 watts + 5 watts (4 ohms at 1 kHz, 10% THD) Music power output (reference): 9 watts + 9 watts Australian model: DIN power output (rated): 4 watts + 4 watts (4 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 5 watts + 5 watts (4 ohms at 1 kHz, 10% THD) Speaker Speaker system: Full range, 8 cm dia. , cone type Rated impedance: 4 ohms Dimensions (W/H/D): Approx. 148 mm × 240 mm × 127 mm Mass: Approx. 1. 23 kg net per speaker General Sleep Timer: 2 Turn down the volume. Press VOLUME . 3 Select the AUDIO IN function. Press FUNCTION +/ repeatedly. You can fall asleep to music. This function works even if the clock is not set. If you select "AUTO, " the system automatically turns off after the current disc stops, or within 100 minutes. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. The sound is distorted. If "PROTECT" appears on the display Make sure the iPod is connected securely. Set the "EQ" setting of the iPod to "Off " or "Flat. " Power requirements: UK model: AC 230 V, 50/60 Hz Australian model: AC 230 V 240 V, 50/60 Hz Power consumption: 28 watts Dimensions (W/H/D) (excl. 158 mm × 240 mm × 251. 5 mm Mass (excl. 2. 3 kg Supplied accessories: Remote Commander (1), DAB/FM lead antenna (1) Design and specifications are subject to change without notice. 4 Start playback. Start playback of the connected component and adjust the volume. Note The system may enter standby mode automatically if the volume level of the connected component is too low. Adjust the component's volume accordingly. See "To turn off the automatic standby function. " Play Timer: You can wake up to CD, DAB/FM reception or iPod at a preset time. Make sure you have set the clock. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific CD track or audio file, create your own program. Immediately unplug the power cord, and check the following items after "PROTECT" disappears. Are the + and speaker cords short-circuited? Is anything blocking the ventilation holes of the system? Is the iPod connector short-circuited?After you have checked these above items and found to be all right, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. The iPod does not function. Input Make sure the iPod is connected securely. Make sure the iPod is updated with the latest software. If not, update the iPod before using with the system. [. . . ] When unplugging the unit, always grip the plug. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. The AC power cord can be changed only by a qualified service facility. iPod nano 5th generation (video camera) iPod touch 2nd generation/ iPod touch Late 2009 iPod classic 120 GB 160 GB (2009) On placement Starting playback takes more time than usual. 1 Disconnect and reconnect the power cord, and then turn on the system. The following discs can increase the time it takes to start playback; a disc recorded with a complicated tree structure. a disc that has not been finalized (a disc to which data can be added). [. . . ]