User manual SONY CMT-GPX7

[. . . ] 4-253-903-12(5) Micro Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. ______________ CMT-GPX7 CMT-GPX6 CMT-GPX5 ©2004 Sony Corporation WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. [. . . ] Press . /> repeatedly to adjust the level while "BASS" or "TREBLE" appears. Check the SLEEP once. remaining time** Change the time to turn off SLEEP repeatedly to select the time you want. Cancel the Sleep SLEEP repeatedly until "OFF" Timer function appears. ** You cannot check the remaining time if you select "AUTO". Tip You can also adjust the bass and treble levels by turning BASS +/­ or TREBLE +/­ on the unit. You can use Sleep Timer, even if you have not set the clock. 18GB Waking up to music -- Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . /> repeatedly until "PLAY SEL" appears, then press ENTER. Change the setting Cancel the timer Start over from step 1. 1 Prepare the sound source you want to play. 1 Press CLOCK/TIMER SELECT. 2 Press . /> repeatedly until "TIMER OFF" appears, then press ENTER. Notes · CD: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 11). · TAPE: Load a tape (see "Playing a tape" on page 15). · TUNER: Tune in a radio station (see "Listening to the radio" on page 13). 2 3 4 Adjust the volume. Press . /> repeatedly until "PLAY SET" appears, then press ENTER. "ON" appears and the hour indication flashes. 5 · If you use Play Timer and Sleep Timer at the same time, Sleep Timer has priority. · Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, Play Timer will not be activated. · You cannot use the optional component connected to the MD/VIDEO jacks as sound sources for Play Timer. · You cannot activate Play Timer and Rec Timer simultaneously. Sound Adjustment/Timer Set the time to start playing. Press . /> repeatedly to set the hour, then press ENTER. Press . /> repeatedly to set the minute, then press ENTER. 6 7 Set the time to stop playing following the same procedure as step 5. Press . /> repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. The start time, the stop time, and the sound source appear in turn, then the original display returns. 9 Press ?/1 to turn off the system. 19GB Timer recording radio programs -- Rec Timer To timer record, you must first preset the radio station (see "Presetting radio stations" on page 12) and set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . /> repeatedly until "REC SEL" appears, then press ENTER. Change the setting Cancel the timer Start over from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press . /> repeatedly until "TIMER OFF" appears, then press ENTER. Notes 1 2 3 Tune in the preset radio station (see "Listening to a preset station" on page 13). Press . /> repeatedly until "REC SET" appears, then press ENTER. "ON" appears and the hour indication flashes. 4 Set the time to start recording. Press . /> repeatedly to set the hour, then press ENTER. Press . /> repeatedly to set the minute, then press ENTER. 5 Set the time to stop recording following the same procedure as step 4. · If you use Rec Timer and Sleep Timer at the same time, Sleep Timer has priority. · Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, Rec Timer will not be activated. [. . . ] · Do not place the system in locations where it is; ­ Extremely hot or cold ­ Dusty or dirty ­ Very humid ­ Subject to vibrations ­ Subject to direct sunlight. · Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc. ) as staining or discoloration of the surface may result. Additional Information On heat buildup · Although the system heats up during operation, this is not a malfunction. · Place the system in a location with adequate ventilation to prevent heat build-up in the system. · If you continuously use this system at a high volume, the cabinet temperature of the top, side and bottom rises considerably. [. . . ]