User manual SONY CMT-HPX7

[. . . ] The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] ⷠYou cannot use the optional component connected to the MD/VIDEO jacks or the transmitter (CMTHPX10W only) as sound sources for Play Timer. /> repeatedly to set the hour, then press ENTER. Set the time to stop playing following the same procedure as step 5. /> repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: The start time, the stop time, and the sound source appear in turn, then the original display returns. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 14) and set the clock (see "Setting the clock" on page 9). Until "REC SEL" appears, then press ENTER. Until "TIMER OFF" appears, then press ENTER. /> repeatedly until "REC" appears, then press ENTER. "ON" appears with a flashing hour indication. /> repeatedly to set the hour, then press ENTER. Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). ⷠIf the system is on about 15 seconds before the preset time, Rec Timer will not be activated. Set the time to stop recording following the same procedure as step 4. The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. You can check the playing time and remaining time of the current track or that of the disc. When a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. Each time you press the button, the display switches as follows: Clock display* y No display (Power Saving Mode) * The clock is displayed only if you set the clock. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time or "­ ­. ⭠­"* t Remaining time of the disc or "­ ­. ­ ­"* t Track title (disc with MP3 audio tracks** only) t Album name* t Clock display t Bass level t Treble level * For discs with MP3 audio tracks ** When you play back a track with an ID3 tag, the ID3 tag appears. [. . . ] the perimeter of the seal on the disc is tacky. ­ Discs that have labels printed using a special ink that feels tacky when touched. , heart, square, star) cannot be played on this unit. Do not place the system in locations where it is; ­ Extremely hot or cold ­ Dusty or dirty ­ Very humid ­ Subject to vibrations ­ Subject to direct sunlight · Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc. [. . . ]