User manual SONY CMT-HPX9

[. . . ] 4-255-291-11(2) Micro Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. ______________ CMT-HPX10W CMT-HPX9 CMT-HPX7 ©2004 Sony Corporation WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. [. . . ] · If the system is on about 15 seconds before the preset time, Play Timer will not be activated. · You cannot use the optional component connected to the MD/VIDEO jacks or the transmitter (CMTHPX10W only) as sound sources for Play Timer. · You cannot activate Play Timer and Rec Timer simultaneously. Press . /> repeatedly to set the hour, then press ENTER. Press . /> repeatedly to set the minute, then press ENTER. 6 7 Set the time to stop playing following the same procedure as step 5. Press . /> repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. The start time, the stop time, and the sound source appear in turn, then the original display returns. 9 20GB Press ?/1 to turn off the system. Timer recording radio programs -- Rec Timer To timer record, you must first preset the radio station (see "Presetting radio stations" on page 14) and set the clock (see "Setting the clock" on page 9). Use buttons on the remote for the operation. Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . /> repeatedly until "REC SEL" appears, then press ENTER. Change the setting Cancel the timer Start over from step 1. 1 Press CLOCK/TIMER SELECT. 2 Press . /> repeatedly until "TIMER OFF" appears, then press ENTER. 1 2 3 4 Tune in the preset radio station (see "Listening to a preset station" on page 15). Press . /> repeatedly until "REC" appears, then press ENTER. Timer Notes "ON" appears with a flashing hour indication. Set the time to start recording. Press . /> repeatedly to set the hour, then press ENTER. Press . /> repeatedly to set the minute, then press ENTER. · If you use Rec Timer and Sleep Timer at the same time, Sleep Timer has priority. · Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, Rec Timer will not be activated. · The volume is reduced to minimum during recording. · You cannot activate Play Timer and Rec Timer simultaneously. 5 6 7 Set the time to stop recording following the same procedure as step 4. Rec Timer settings and the desired station appear, then the original display returns. Load a recordable tape. Press ?/1 to turn off the system. 21GB Display Turning off the display -- Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. To cancel Power Saving Mode Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. When a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. Checking the remaining time and titles (CD/MP3) Press DISPLAY repeatedly during playback. Press DISPLAY while the system is off. Each time you press the button, the display switches as follows: Clock display* y No display (Power Saving Mode) * The clock is displayed only if you set the clock. Tips · The ?/1 indicator lights up even in Power Saving Mode. · The timer continues to operate in Power Saving Mode. Note Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time or "­ ­. ­ ­"* t Remaining time of the disc or "­ ­. ­ ­"* t Track title (disc with MP3 audio tracks** only) t Album name* t Clock display t Bass level t Treble level * For discs with MP3 audio tracks ** When you play back a track with an ID3 tag, the ID3 tag appears. The ID3 tag displays only the track title information. You cannot perform the following operations in Power Saving Mode. ­ setting the clock ­ switching the MD/VIDEO function ­ switching the CD power on or off using the CD power manage function ­ changing the AM tuning interval Checking the total playing time and titles (CD/MP3) Press DISPLAY repeatedly in stop mode. Each time you press the button, the display changes cyclically as follows: TOC display* or total number of albums on the disc** or total track number of the current album** t Disc name** t Clock display t Bass level t Treble level * TOC = Table of Contents; displays total number of tracks on the disc and total playing time of the disc. ** For discs with MP3 audio tracks, album titles may not be displayed depending on the play mode. 22GB Optional Components Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. Optional analog component From the audio output jacks of an optional analog component Display/Optional Components A MD/VIDEO jacks Use audio cords (not supplied) to connect an optional analog component (MD deck, etc. ) to these jacks. [. . . ] · Place the system in a location with adequate ventilation to prevent heat build-up in the system. · If you continuously use this system at a high volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet. · To prevent a malfunction, do not cover the ventilation hole. Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with mild detergent solution. [. . . ]