User manual SONY CMT-HX9DAB

[. . . ] As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. Excessive sound pressure from earphones and headphones can cause hearing loss. Except for customers in the U. S. A. [. . . ] USB Press FUNCTION +/ repeatedly to select the USB function. 2 3 Select the play mode. Press PLAY MODE repeatedly until "PGM" appears while the system is stopped. Select the desired track or file number. Press / repeatedly until the desired track or file number appears. When programming MP3 files, press +/ repeatedly to select the desired folder, and then select the desired file. Selected track or file number Total playing time of the selected track or file Continued GB 4 Program the selected track or file. Press to enter the selected track or file. To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the system is stopped. CD " . " appears when the total program time exceeds 100 minutes for a CD or when you select an MP3 file. USB The total program time cannot be displayed, so " . " appears. To delete the last track or file of the program Press CLEAR while the system is stopped. To view program information, such as total track number of the program Press DISPLAY repeatedly. 5 6 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. To play your program of tracks or files, press . The program remains available until you remove the disc or USB device. To play the same program again, press . GB Using optional audio components 1 Prepare the sound source. 2 3 4 5 Adjusting the sound To Generate a more dynamic sound (Dynamic Sound Generator X-tra) Set the sound effect Press DSGX on the unit. Connect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). Press VOLUME . Operations Turn down the volume. Select the AUDIO IN function. Press FUNCTION +/ repeatedly. EQ repeatedly. Start playback. Start playback of the connected component and adjust its volume. Adjust the volume. Press VOLUME +/. GB Changing the display To Change information on the display1) Check the clock when the system is off 1) Press DISPLAY repeatedly when the system is on. The clock is displayed for 8 seconds. 2) For example, you can view CD/MP3 disc information or the USB device information, such as; track or file number during normal play. track or file name (" ") during normal play. Make sure you have set the clock. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. When you set the CD or USB device as the sound source, you can start the sound source from a specific track or file. See "Creating your own program" (page 27). When you set the tuner band as the sound source, make sure to tune in a desired station or call up a desired preset station (page 17). 2 3 Select the timer set mode. Press TIMER MENU. Set the play timer. Press / repeatedly to select "PLAY SET, " and then press . "ON TIME" appears, and the hour indication flashes. Continued 1GB 7 Turn off the system. Press /. The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not be activated. Do not operate the system from the time the system turns on until the playback starts. To check the setting 1 Press TIMER MENU. 3 Press / repeatedly to select "PLAY SEL. " "SELECT" flashes in the display. 4 Press . To cancel the timer 1 Press TIMER MENU. 3 Press / repeatedly to select "OFF. " 4 Press . "SELECT" flashes in the display. To change the setting Start over from step 1. Tip The Play Timer setting remains as long as the setting is not canceled manually. GB Additional Information The specified station may have temporarily stopped broadcast. [. . . ] PUSH STOP You have pressed PLAY MODE during playback. You have pressed the buttons whose operation is only possible when playback is stopped. Additional Information Continued GB READING The system is reading information of the disc. The system is recognizing the USB device. REC ERROR Transferring did not start, stopped partway, or otherwise could not be performed (page 35). [. . . ]