User manual SONY CMT-LX40I

[. . . ] Micro HI-FI Component System Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives. Main unit Getting Started Antennas To adjust the volume Press VOLUME +/ . Find a location and an orientation that provide good reception, and then set up the antenna. Keep the antennas away from the speaker cords and the power cord to avoid picking up noise. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. [. . . ] This function works even if the clock is not set. If you select "AUTO, " the system automatically turns off after the current disc stops or in 100 minutes. 2 Find your problem in the checklist below, and take the indicated corrective action. If the issue persists, contact your nearest Sony dealer. The sound is distorted. This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. Compatible iPod models: If the STANDBY indicator flashes Turn down the volume. Set the "EQ" setting of the iPod to "Off " or "Flat. " Cleaning the cabinet Using optional audio components 1 Prepare the sound source. 3 Start playback. Press (or on the unit) . Connect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). Play Timer: You can wake up to CD, tuner or iPod at a preset time. Use buttons on the remote to use the Play Timer functions. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. To start from a specific CD track or audio file, create your own program. To control the iPod 2 Turn down the volume. Press VOLUME . You can control your iPod with the following buttons on the remote or unit. To Pause playback Press (pause) (or (play/pause) on the unit) or (stop) . You can scroll up or down the iPod menus much like the Click Wheel operations of the iPod or the drag up-or-down operations of the iPod touch. To fast-forward or fastrewind, hold down the button. 3 Select the AUDIO IN function. Press FUNCTION +/ repeatedly. Immediately unplug the power cord, and check the following items. If your system has a voltage selector, is the voltage selector set to the correct voltage? Are you using only the supplied speakers? Is anything blocking the ventilation holes on the top or back of the system?After the STANDBY indicator stops flashing, reconnect the power cord, and turn on the system. If the issue persists, contact your nearest Sony dealer. The remote does not function. Make sure the iPod is updated with the latest software. If not, update the iPod before using with the system. Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. iPod touch 2nd generation iPod nano 4th generation (video) iPod touch 1st generation The iPod cannot be charged. Make sure the iPod is connected securely. You can use the system as a battery charger for iPod only when the system is on. Specifications Mainunit AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (CMT-LX20i The United States model only) With 4 ohm loads, both channels driven, from 120 10, 000 Hz; rated 25 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. iPod nano 3rd generation (video) iPod classic "OVER CURRENT" appears. iPod nano 2nd generation (aluminum) 4 Start playback. Start playback of the connected component and adjust its volume. 2 Select the timer set mode. Press TIMER MENU . Scroll up/down the iPod menus 3 Set the play timer. Press / repeatedly to select "PLAY SET, " then . press "ON TIME" appears, and the hour indication flashes. General The system does not turn on. Is the power cord plugged in? A problem has been detected with the level of electrical current from the iPod connector. Turn off the system and remove the iPod from the iPod connector. [. . . ] OVER: You have reached the end of the disc while pressing during playback or pause. PUSH STOP: You pressed PLAY MODE during playback. READING: The system is reading information from the disc. TIME NG: The Play Timer start and end times are set to the same time. CD-ROM CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet CD-R/CD-RW recorded in multisession that have not ended by "closing the session" CD-R/CD-RW of poor recording quality, CD-R/ CD-RW that have scratches or are dirty, or CD-R/CDRW recorded with an incompatible recording device CD-R/CD-RW which is finalized incorrectly Discs containing files other than MPEG 1 Audio Layer3 (MP3) files Discs of non-standard shape (for example, heart, square, star) Discs that have adhesive tape, paper, or sticker attached to them Rental or used discs with attached seals where the glue extends beyond the seal Discs that have labels printed using ink that feels tacky when touched Halogenated flame retardants are not used in the certain printed wiring boards. * Frequencies are displayed to two decimal places on this system. [. . . ]