User manual SONY CMT-M100MD

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] 6 Repeat step 5 until point A is played " appear alternately and the deck repeats a portion of the few seconds before point A and after point B successively. The remote) repeatedly until the desired track number to move appears, then press ENTER/YES on the remote. You can use this function to mark track numbers after recording. The total number of tracks increases by one and all the tracks following the divided ones are renumbered. Example: Dividing track 2 into two tracks. The remote) repeatedly until the new track position appears. Original track number New track position Divide track 2 into track B and C 4 When you move a track to a track number that is registered into a group, the moved track is reregistered into the group containing the moved destination track number. In addition, if you move a track that is registered into a group to a track number that is not registered into a group, the group registration of the moved track is released. However, when the Group Function is on, you can only move tracks within the selected group. The remote) repeatedly until the desired track number to divide appears, then press ENTER/YES on the remote. You can use this function to combine 2 tracks into a single track. The total number of tracks decreases by one and all tracks following the combined ones are renumbered. You can also use this function to erase unnecessary track numbers. You can shift the point by 1/86 second (1 frame) intervals*. To shift the point by second or minute intervals, press m or M so that second or minute flashes, then press l or L (or . * You can shift the starting point by 2-frame intervals (in Monaural mode and LP2 Stereo mode) or by 4-frame intervals (in LP4 Stereo mode). If you divide a labelled track (see "Labelling an MD" on page 30) into two tracks, only the first track retains the track title. The new track is not labelled After COMBINE You can use this function to cancel the last edit and restore the contents of the MD to the condition before the edit. Note, however, that you cannot undo an edit if you do any of the following after the edit: · The remote) repeatedly until the first track number of the two to be combined appears, then press ENTER/ YES on the remote. For example, to combine track 1 to 4, select 4. The remote) repeatedly until the second track number of the two to be combined appears. Second track number to be continued New track number " does not appear when there is no editing function that can be cancelled. [. . . ] You pressed PLAY MODE/DIRECTION (or PLAY MODE on the remote) during play. The MD is playing the specified dividing point for confirmation during the A-B Erase Function and the Divide Function. An attempt was made to create a new group in excess of the maximum number of groups, or there are insufficient characters for updating the group management information. You attempted to perform another operation while in S. [. . . ]