User manual SONY CMT-MX500I

[. . . ] Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives. Unit Getting Started Notes on playing multisession discs The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses given in separate service or guarantee documents. If the first session on the disc is a CD-DA session, the other sessions on the disc cannot be recognized regardless of the session format; only CD-DA tracks in the first session can be played back. If the session format for the first session is CD-ROM and the following sessions are recorded in the same format, the system will continue to play back MP3 files accordingly in multiple sessions until the system encounters another session recorded in a different format. Playing the iPod/iPhone 1 Select the iPod function. Press FUNCTION +/ repeatedly. 2 Place the iPod/iPhone. [. . . ] Adjust the component's volume accordingly. See "To turn off the automatic standby function. " 6 Select the sound source. Press / repeatedly until the desired sound . source appears, then press The STANDBY indicator may not turn off immediately after unplugging the power cord. The indicator will turn off after about 40 seconds. This is not a malfunction. Erroneous display Completely disconnect the power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. The AC power cord can be changed only by a qualified service facility. 2 Connect the USB device to the (USB) port . 3 Press TOOL MENU , and then press ENTER . 4 Press / repeatedly to select a memory CD/MP3 player The sound skips, or the disc will not play. Wipe the disc clean, and replace it. Move the system to a location away from vibration (for example, on top of a stable stand). Move the speakers away from the system, or place them on separate stands. At high volume, speaker vibration may cause the sound to skip. Send the music data to the USB device again, as the data stored in the USB device may have been corrupted. The character codes that can be displayed by this system are numbers and alphabets only. Other characters are not displayed correctly. On placement 7 Turn off the system. Press . The system automatically turns on before the preset time. If the system is on at the preset time, the Play Timer will not play. Do not operate the system from the time the system turns on until the playback starts. The USB device is not recognized. number. Proceed to step 5 if only one memory can be selected. To cancel this operation, press . 5 Press ENTER . Notes When USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. See the operation manual supplied with the USB device to be connected for details on the operation method. It may take about 10 seconds before "Reading" appears depending on the type of USB device connected. [. . . ] The specified station may have temporarily stopped broadcast. A problem has been detected with the level of electrical current from the (USB) port . Turn off the system and remove the USB device from the (USB) port . Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. to display the clock, and then press while holding down + , until "CD POWER OFF" appears. [. . . ]