User manual SONY CMT-MX550I

[. . . ] To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Simply select a station from the FM band. Each time you press DISPLAY, the display changes cyclically as follows: Station name* t Frequency t Program type* t Clock display t Bass level t Treble level * If the RDS broadcast is not properly received, the station name or the program type may not appear in the display. Load a recorded/recordable tape into the cassette holder. With the side you want to play/record facing towards you. Press the button again to play the reverse side. * Relay play always follow this cyclic sequence: Deck A (front side) t Deck A (reverse side) t Deck B (front side) t Deck B (reverse side) For CMT-MX550I, deck A does not play the reverse side. Play the reverse side* Stop play Pause Fast-forward or rewind Remove a tape Searching for the beginning of the current or the previous or the next track (AMS)* To go forward press > during play. Each time you press the button, the search direction, + (forward), and number of tracks being skipped (1 to 9) appear. the recording level is adjusted automatically. Use buttons on the unit for the operation. Each time you press the button, the search direction, ­ (back), and number of tracks being skipped (1 to 9) appear. You can record a preset radio station from a specified time. To timer record, you must first preset the radio station (see "Presetting radio stations" on page 12) and set the clock (see "Setting the clock" on page 8). If you select both sides recording or front side recording, press nN to light up the >>> indicator. If you record on the reverse side, press nN again to light up the <<< indicator. Or > repeatedly to set the hour, then press ENTER. Set the time to stop recording following the same procedure as step 4. , "TUNER FM 5") appear in turn, before the original display returns. Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). ⷠIf the system is on about 15 seconds before the preset time, the Rec Timer will not be activated. press TAPE to switch the function to TAPE. Press PLAY MODE repeatedly until g appears to record on one side or h (or j) to record on both sides. [. . . ] When using discs that have glue or similar tacky substance on the label side of the disc or that used a special ink when the label was printed, there is a chance that the disc or label may become attached to parts inside this unit. When this occurs, it may not be possible to remove the disc, and may also cause this unit to malfunction. Be sure to check that the label side of the disc is not sticky before using. The following types of disc should not be used: ­ Rental or used discs with attached seals where the glue extends beyond the seal. [. . . ]