User manual SONY CMT-NE5

[. . . ] 4-253-397-11(6) Micro Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. ______________ CMT-NE5 CMT-NE3 ©2004 Sony Corporation WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. [. . . ] t 10MIN t OFF * The system automatically turns off in 100 minutes or after the current CD or tape finishes playing. Tape ­ Recording/Sound Adjustment/Timer Adjusting the bass and treble You can adjust the bass and treble. Other operations To Press 1 Press EQ (or BASS/TREBLE on the unit) repeatedly to select "BASS" or "TREBLE". Check the SLEEP once. remaining time** Change the time to turn off Cancel Sleep Timer function SLEEP repeatedly to select the time you want. SLEEP repeatedly until "OFF" appears. Each time you press the button, the display changes cyclically as follows: BASS y TREBLE 2 Press . /> (or TUNING +/­ on the unit) repeatedly to adjust the level while "BASS" or "TREBLE" appears. ** You cannot check the remaining time if you select "AUTO". Note Do not set to "AUTO" during Synchro Recording on a tape. Tip You can use Sleep Timer, even if you have not set the clock. 17GB Waking up to music -- Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. Other operations To Do this Cancel the timer/ activate the timer/ check the setting 1 Press CLOCK/TIMER SELECT and "SELECT" appears. 2 Press . /> repeatedly until "PLAY", "REC" or "(TIMER) OFF" appears, then press ENTER. Start over from step 1. 1 Prepare the sound source you want to play. Change the setting Notes · CD: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 11). · TAPE: Load a tape (see "Playing a tape" on page 15). · TUNER: Tune in a radio station (see "Listening to the radio" on page 13). 2 3 4 Adjust the volume. Press . /> repeatedly until "PLAY" appears, then press ENTER. · If you use Play Timer and Sleep Timer at the same time, Sleep Timer has priority. · Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, Play Timer will not be activated. · You cannot use the optional component connected to the MD jacks as sound sources for Play Timer. · You cannot activate Play Timer and Rec Timer at the same time. "ON TIME" appears and the hour indication flashes. 5 Set the time to start playing. Press . /> repeatedly to set the hour, then press ENTER. Press . /> repeatedly to set the minute, then press ENTER. 6 7 Set the time to stop playing following the same procedure as step 5. Press . /> repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD T t TAPE T 8 9 Press ENTER. The start time, the stop time and the sound source, then the original display returns. Press ?/1 to turn off the system. 18GB Timer recording radio programs -- Rec Timer To timer record, you must first preset the radio station (see "Presetting radio stations" on page 12) and set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. Other operations To Do this Cancel the timer/ activate the timer/ check the setting 1 Press CLOCK/TIMER SELECT and "SELECT" appears. 2 Press . /> repeatedly until "PLAY", "REC" or "(TIMER) OFF" appears, then press ENTER. Start over from step 1. Change the setting Notes 1 2 3 Tune in the preset radio station (see "Listening to a preset station" on page 13). Press . /> repeatedly until "REC" appears, then press ENTER. "ON TIME" appears and the hour indication flashes. 4 Set the time to start recording. Press . /> repeatedly to set the hour, then press ENTER. Press . /> repeatedly to set the minute, then press ENTER. · If you use Rec Timer and Sleep Timer at the same time, Sleep Timer has priority. [. . . ] Attempting to do so may damage the unit. Do not use such discs. On placement · Do not place the system in an inclined position. · Do not place the system in locations where it is; ­ Extremely hot or cold ­ Dusty or dirty ­ Very humid ­ Subject to vibrations ­ Subject to direct sunlight. · Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc. ) as staining or discoloration of the surface may result. On heat buildup · Although the system heats up during operation, this is not a malfunction. [. . . ]