User manual SONY CMT-NEZ3

[. . . ] 2-582-894-14(1) Micro HI-FI Component System Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. ______________ CMT-NEZ5 CMT-NEZ3 ©2005 Sony Corporation WARNING WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. [. . . ] Use buttons on the remote for the operation. Press SLEEP. Each time you press the button, the display changes as follows: DSGX ON y DSGX OFF Adjusting the bass and treble You can adjust the bass and treble to enjoy more powerful sound. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90MIN t 80MIN t . . . t 10MIN t OFF * The system automatically turns off in 100 minutes or after the current CD or tape finishes playing. Tape ­ Recording/Sound Adjustment/Timer 1 Press EQ repeatedly to select "BASS" or "TREBLE". Other operations To Press Each time you press the button, the display changes as follows: BASS y TREBLE Check the remaining time* Change the time to turn off SLEEP once. SLEEP repeatedly to select the time you want. 2 Press . or > repeatedly to adjust the level while "BASS" or "TREBLE" appears. Cancel the Sleep SLEEP repeatedly until "OFF" Timer Function appears. * You cannot check the remaining time if you select "AUTO". Note Do not set to "AUTO" during Syncro Recording on a tape. Tip You can use the Sleep Timer, even if you have not set the clock. 17GB Waking up to music -- Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. Other operations To Do this Check the setting 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "PLAY" appears, then press ENTER. Change the setting Cancel the timer Start over from step 1. 1 Prepare the sound source you want to play. 1 Press CLOCK/TIMER SELECT. 2 Press . or > repeatedly until "OFF" appears, then press ENTER. Notes · CD: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 11). · Tape: Load a tape (see "Playing a tape" on page 15). · Tuner: Tune in the preset radio station (see "Listening to the radio" on page 13). 2 3 4 Press VOLUME + or ­ (or turn VOLUME control on the unit) to adjust the volume. or > repeatedly to select "PLAY", then press ENTER. "ON TIME" appears and the hour indication flashes. · If you use the Play Timer and the Sleep Timer at the same time, the Sleep Timer has priority. · Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, the Play Timer will not be activated. · You cannot use the optional component connected to AUDIO IN jack as the sound source for Play Timer. · You cannot activate the Play Timer and the Rec Timer at the same time. · The Play Timer setting remains as long as the setting is not canceled manually. 5 Set the time to start playing. Press . or > repeatedly to set the hour, then press ENTER. or > repeatedly to set the minute, then press ENTER. 6 7 Set the time to stop playing following the same procedure as step 5. or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD T t TAPE T 8 Press ENTER. The start time, the stop time and the sound source appear in turn, then the original display returns. 9 18GB Press ?/1 to turn off the system. Timer recording radio programs -- Rec Timer You can record a preset radio station from a specified time. [. . . ] Attempting to do so may damage the unit. Do not use such discs. On placement · Do not place the system in an inclined position. · Do not place the system in locations where it is; ­ Extremely hot or cold ­ Dusty or dirty ­ Very humid ­ Subject to vibrations ­ Subject to direct sunlight. · Use caution when placing the unit or speakers on surfaces that have been specially treated (with wax, oil, polish, etc. ) as staining or discoloration of the surface may result. On heat buildup · Although the system heats up during operation, this is not a malfunction. [. . . ]