User manual SONY CMT-NEZ31

[. . . ] For any service or guarantee matters, please refer to the addresses given in separate service or guarantee documents. To connect an optional headphones To set the clock Speakers Connect headphones to the PHONES jack on the unit. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. [. . . ] Primary service is automatically received when secondary service ends. This tuner does not support data services. 3 Press +/ repeatedly to select the desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new station. Tip 4 Press to store the station. 5 Repeat steps 1 through 4 to store other stations. You can preset up to 20 DAB, 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. To reduce static noise on a weak FM stereo station, press FM MODE repeatedly until "MONO" appears to turn off stereo reception. Running the DAB Automatic Scan manually 1 Press DAB AUTO SCAN on the unit to start the DAB Automatic Scan. "AUTO SCAN?" and "PUSH ENTER" appear. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Notes on playing multisession discs 6 To call up a preset radio station, press TUNING Stop playback Select a folder on an MP3 disc Select a track or file If the disc begins with a CD-DA (or MP3) session, it is recognized as a CD-DA (or MP3) disc, and playback continues until another session is encountered. A disc with a mixed CD format is recognized as a CD-DA disc. MODE repeatedly until "PRESET" appears, and then press +/ repeatedly to select the desired preset number. Note on presetting DAB stations (select folder) +/ repeatedly. / (go back/go forward) . You can preset a DAB service only when it can be received. Playing the iPod 1 Select the iPod function. Press FUNCTION +/ repeatedly. To cancel Program Play Press PLAY MODE repeatedly until "PGM" disappears while the player is stopped. Using the timers The system offers two timer functions. If you use both timers, the Sleep Timer has priority. Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. iPod There is no sound. Make sure the iPod is connected securely. Adjust the volume. Display examples Display indicates 2 (two) On the speaker system iPodsection To delete the last track or file of the program Press CLEAR while the player is stopped. 2 Place the iPod. To view program information, such as total track number of the program Press DISPLAY repeatedly. Sleep Timer: 5 (five) 6 (six) 8 (eight) 0 (zero) A B D G H K M O Q R S Z !This function works even if the clock is not set. If this display pattern persistes, contact your nearest Sony dealer. Amplifiersection CMT-LX40i DIN power output (rated): 4 + 4 watts (4 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 5 + 5 watts (4 ohms at 1 kHz, 10% THD) Music power output (reference): 9 + 9 watts DIN power output (rated): 4 + 4 watts (4 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 5 + 5 watts (4 ohms at 1 kHz, 10% THD) AUDIO IN (stereo mini jack): Voltage 775 mV, impedance 22 kilohms PHONES (stereo mini jack): accepts headphones with an impedance of 8 ohms or more SPEAKER: accepts impedance of 4 ohms 5 Adjust the volume. Press VOLUME +/ . There is no sound. To change the AM tuning interval (CMT-LX20i only) Select a track or chapter of audiobook/podcast Choose the selected item 4 Set the time to start playback. Adjusting the sound To Generate a more dynamic sound (Dynamic Sound Generator X-tra) Press DSGX on the unit. Find a point in a track or chapter of audiobook/podcast Return to the previous menu or select a menu / (enter) (or ENTER on the unit) . You can choose the selected item much like the center button on the iPod or the touch operation of the iPod touch. Hold down / (rewind/ fast forward) during playback, and release the button at the desired point. You can return to the previous menu or select a menu much like the Menu button on the iPod or the touch operation of the iPod touch. Press / repeatedly to set the hour, then press . Use the procedure above to set the minutes. "OFF TIME" appears and the hour indication flashes in the display. Are the + and speaker cords short-circuited? Are you using only the supplied speakers? Is anything blocking the ventilation holes on the top or back of the system? The specified station may have temporarily stopped broadcast. The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). Use buttons on the unit to change the AM tuning interval. iPod 5th generation (video) iPod nano 1st generation iPod 4th generation (color display) CMT-LX20i 1 Tune in any AM station, and then turn off the system. Inputs 5 Use the same procedure as in step 4 to set the time EQ repeatedly. to stop playback. Set the sound effect The STANDBY indicator remains lit after unplugging the power cord. 2 Press DISPLAY to display the clock. [. . . ] NOT USED: You pressed an invalid button. OVER: You have reached the end of the disc while pressing during playback or pause. PUSH STOP: You pressed PLAY MODE during playback. READING: The system is reading information from the disc. [. . . ]