User manual SONY CMT-PX333

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] When changing the recording level, you can select Fade-in Recording to gradually increase the signal level at the start of recording, or Fade-out Recording to gradually decrease the signal level at the end of the recording. The recording level can be changed from ­12 dB to +12 dB, in 2 dB steps. While monitoring the sound, change to the optimum level while making sure that "OVER" does not appear in the display at the loudest portion. F Edit: ** %" appears while the track is being recorded. An amount of time that is roughly equal to or longer than the playback time of the track is required when recording over the track. Track number you want to change the recording level appears, then press ENTER/YES on the remote. The system plays the portion that will be recorded over using Fade-in or Fade-out Recording. You can set the time at any value between 1. You cannot set the time longer than the track. F Edit: ** %" appears while the track is being recorded. Track number you want to change the recording level appears, then press ENTER/YES on the remote. After recording starts in step 8, you cannot interrupt the operation. Do not disconnect the mains lead or move the system while recording is in progress. This may damage the recording data preventing recording from being performed properly. This may prevent recording data from being recorded properly. Repeatedly changing the recording level results in poor sound quality. The recording level will not return to the exact original level once the recording level has been changed even if it returned to the original level. The recording level cannot be changed while the timer is activated. To tune in a station with a weak signal Press TUNING MODE repeatedly until "MANUAL" appears in step 2, then press TUNING + or ­ (or + or ­ on the remote) repeatedly to tune in the station manually. The frequency indication changes and the scanning stops when the system tunes in a station. Perform steps 6 and 7 while the preset number is flashing. To change the AM tuning interval, tune in any AM station first, then turn off the system. [. . . ] You tried to change the recorded level of a track recorded in LP2 or LP4 mode. You tried to change the recorded level of a track recorded in LP2 or LP4 mode. There is an error in the internal data that the system needs in order to operate. There is a problem with the optical pickup. [. . . ]