User manual SONY CMT-RB5

[. . . ] 4-230-268-13(1) Micro Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located on the rear panel of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. CMT-RB5 Serial No. CMT-RB5 ©2000 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. [. . . ] You can preset the time to turn off in 10 minutes increments. What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. Note RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. ?/1 SLEEP N X x , Press SLEEP repeatedly to select a desired time. Each time you press the button, the minute display (the remaining time) changes as follows: t SLEEP OFF t AUTO 10min T . . . T 80min T 90min T "SLEEP" flashes in the display, except when "SLEEP OFF" is selected. Receiving RDS broadcasts , Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the remaining time Press SLEEP once. However, the remaining time is not displayed when "AUTO" is selected. To check the RDS information Each time you press DISPLAY, the display changes as follows: t Station name* r Frequency r Clock display (for eight seconds) r BASS level (for three seconds) r TREBLE level (for three seconds) * If the RDS broadcast is not received, the station name may not appear in the display. To change the time to turn off Select the time you want by pressing SLEEP. To cancel the Sleep Timer function Press SLEEP repeatedly until "SLEEP OFF" appears. 16 When you select "AUTO" The system automatically turns off after the CD finishes playing (up to 100 minutes). When the function is TUNER, the system turns off in 100 minutes. Tip You can use the Sleep Timer, even if you have not set the clock. Waking up to music -- Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see page 6). CLOCK/ TIMER SELECT ?/1 4, 5 6, 8 N X x m M 9 3 Other Features 5, 6, 7 2 1 . > 2 5, 6, 7 Prepare the sound source you want to play. · CD: Place a CD. To start from a specific track, make a program (see page 12). · Radio: Tune in a station (see page 10). 2 3 4 Press VOL +/­ repeatedly to adjust the volume. Press CLOCK/TIMER SET. "SET DAILY" appears. "DAILY" and the c indicator start flashing. Press ENTER. "ON" lights up, and the hour indication flashes. ON 0:00 continued 17 Waking up to music (continued) To cancel the timer Press CLOCK/TIMER SELECT, then press . /> repeatedly until "TIMER OFF" appears. Notes · Do not perform any operation from the time the system is turned on until the time play starts (about 15 seconds before the preset time). · If the system is on at the preset time, the set sound source starts playing. · You cannot use the optional components connected to the MD/VIDEO (AUDIO) IN jack as the sound source for Daily Timer. 5 Set the time to start playing. Press . /> repeatedly to set the hour, then press ENTER. The minute indication flashes. ON 8:00 Press . /> repeatedly to set the minute, then press ENTER. The hour indication flashes again. 6 7 Set the time to stop playing following the procedure in step 5. Press . /> to select the desired sound source. The display changes as follows: TUNER Y CD PLAY 8 Press ENTER. The start time, the stop time, and the sound source appear in turn, then the original display returns. "DAILY" and the c indicator light continuously. 9 Press ?/1 to turn off the system. To change the setting Start over from step 1. To check the setting/activate the timer 1 Press CLOCK/TIMER SELECT. 2 Press . /> repeatedly until "SEL DAILY" appears, then press ENTER. 18 Connecting optional components Tip If you cannot select "MD" by pressing FUNCTION, turn off the system, and then press ?/1 while pressing down FUNCTION. The function will be switched from "VIDEO" to "MD". [. . . ] · Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna. · The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. · Locate the antennas as far away from the speaker cords as possible. [. . . ]