User manual SONY CMT-SE1

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Press any button other than BASS +/­, TREBLE +/­, BASS/TREBLE on the unit or +/­ on the unit. Also, if you do not perform any operations for a few seconds, the display automatically returns to the original display. You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 5). Prepare the sound source you want to play. To start from a specific track, make a program (see "Creating your own program" on page 7). If the system is on about 15 seconds before the preset time, the Daily Timer will not be activated. ⷠYou cannot use the optional component connected to MD (TAPE) IN jack as the sound source for Daily Timer. Or > repeatedly to set the hour, then press ENTER. Set the time to stop playing following the same procedure as step 5. Or > repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: TUNER y CD PLAY The start time, the stop time, the sound source and the volume appear in turn, then the original display returns. The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. You can check the playing time and remaining time of the current track or that of the disc. Each time you press the button, the display switches cyclically as follows: Clock display* y No display (Power Saving Mode) * The clock is displayed only if you set the clock. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time t Remaining time of the disc*1 t Track title of CD-TEXT disc*2 t Clock display t Bass level t Treble level You cannot perform the following operations in Power Saving Mode. When the disc contains more than 20 tracks, CD-TEXT is not displayed from track 21 on. Each time you press the button, the display changes cyclically as follows: Total playing time t Disc title* t Clock display t Bass level t Treble level When fast forward or fast reverse is performed, elapsed playing time and remaining time of the track may not be displayed accurately. To enhance your system, you can connect optional components. You can then listen to the sound from the component. Use a digital optical cable (square, not supplied) to connect an amplifier, MD deck, or DAT deck with a digital optical input jack. [. . . ] Move lever on the unit to x and press FUNCTION and ?Over You have reached the end of the disc while pressing M during playback or pause. Be sure to check that the label side of the disc is not sticky before using. The following types of disc should not be used: ­ Rental or used discs with attached seals where the glue extends beyond the seal. [. . . ]