User manual SONY CMT-SE9

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] Or > repeatedly to find the ending point of the portion to be erased (point B) while monitoring the sound, then press ENTER. You can shift the point by 1/86 second (1 frame) intervals. Or > repeatedly until the desired track number to move appears, then press ENTER. Or > repeatedly until the new track position appears. To shift the point by minute or second intervals in steps 6 and 8, press m or M repeatedly to flash minute, second, or frame indication, then press . " appears for a few seconds and the moved track starts playing. When you move a track to a track number that is registered into a group, the moved track is re-registered into the group. In addition, if you move a track that is registered into a group to a track number that is not registered into a group, the group registration of the moved track is released. However, when the Group Function is on, you can only move tracks within the selected group. You can use this function to combine 2 tracks into a single track. The total number of tracks decreases by one and all tracks following the combined ones are renumbered. Or > repeatedly until the second track number of the two to be combined appears. New track number Second track number to be continued Example: Combining track 3 to track 1 Example: Combining track 1 to track 4 When you combine two tracks that are registered into different groups, the second track is reregistered into the group containing the first track. In addition, if you combine a track that is registered to a group with a track that is not registered to a group, the second track takes the same registration setting as the first track. However, when the Group Function is on, you can only combine tracks within the selected group. Tracks recorded in different recording modes (stereo, LP2, LP4 or MONO) cannot be combined. If both of the combined tracks have track titles, the title of the second track is erased. Or > repeatedly until the first track number of the two to be combined appears, then press ENTER. For example, to combine track 1 to 4, select 4. First track number You can use this function to mark track numbers after recording. You can also use this function when recording from tapes or radio programs and track numbers are not marked automatically, and want to mark tracks. The total number of tracks increases by one and all the tracks following the divided ones are renumbered. [. . . ] Even when the region code is not shown on the DVD, the region limit may still be activated. Super Audio CD is a new high quality audio disc standard that records using the DSD (Direct Stream Digital) format instead of the PCM format used for current CDs, etc. The DSD format has a sampling frequency 64 times that of current CDs, and uses 1-bit quantization to ensure a sufficient dynamic range and more faithfully reproduce the original sound over a vastly wider playback range and audible range than current CDs. Super Audio CD (single layer disc) Discs with only a single HD (high density) layer (high density signal layer for Super Audio CD) · Super Audio CD (dual layer disc) Discs with two HD layers that allow longtime playback. [. . . ]