User manual SONY CMT-SP55MD

[. . . ] Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. The following caution label is located inside of the unit. US and foreign patents licensed from Dolby Laboratories. 27 Making a space between tracks 3 seconds long -- Smart Space . [. . . ] or > repeatedly to find the starting point of the portion to be erased (point A). You can shift the starting point by 1/86 second (1 frame) intervals. To shift the point by second or minute intervals, press m or M so that "s" or "m" flashes, then press . Repeat step 6 until point A is played correctly. Continue playback until the deck reaches point B, then press ENTER/ YES. "MD A-B Ers" and "MD Point B ok?" appear alternately and the deck repeats a portion of the few seconds before point A and after point B successively. While playing an MD, press X at the starting point of the portion to be erased (point A). " appears for a few seconds and the portion between point A and B is erased. " appear alternately while the deck plays the selected track from the beginning to point A. To return to the condition before A-B Erase You can return to the original condition immediately after erasing the track by using the Undo function (see page 45). This happens when you have edited the same track many times. This is due to a technical limitation of the MD system and is not a mechanical error. You can use this function to change the order of any track on the disc. When you move tracks, the tracks are automatically renumbered. You can use this function to mark track numbers after recording. The total number of tracks increases by one and all the tracks following the divided ones are renumbered. Example: Dividing track 2 into two tracks. Or > repeatedly until the desired track number to move appears, then press ENTER/YES. Or > repeatedly until the new track position appears. D Divide track 2 into track B and C Original track New track number position " appears for a few seconds and the selected track moves to the appointed position. To return to the track order before Move You can return to the original track order immediately after moving recorded tracks by using the Undo function (see page 45). [. . . ] C41/CannotCopy The sound source is a copy of a commercially available music software, or you tried to record a CD-R (Recordable CD). CThe Serial Copy Management System prevents making a digital copy (see page 63). C71/CheckOPT-IN This appears momentarily because of the signal of the digital broadcast during recording. CSee the operating instructions supplied with the connected component and confirm whether the component is turned on. [. . . ]