User manual SONY CMT-U1BT

[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. and do not place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] To call up a preset radio station, press TUNING MODE repeatedly until "PRESET" appears, and then press +/­ repeatedly to select the desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. Repeat steps 1 through 4 to store other stations. you can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. If you select "AUTO, " the system automatically turns off after the current disc stops or in 100 minutes. Play Timer: You can wake up to CD, tuner or optional USB device at a preset time. use buttons on the remote to control the Play Timer. Use the same procedure as in step 4 to set the time to stop playing. Press / repeatedly until the desired sound source appears, and then press ENTER . The system turns on 15 seconds before the preset time. Prepare the sound source, and then press VOLUME +/­ to adjust the volume. To start from a specific CD track, "ATRAC" file or MP3 file of a disc, create your own program (page 21). Repeat the same procedure as above until "TIMER OFF" appears, and then press ENTER . You cannot perform Program Play of the files on an USB device using the Play Timer. Press / repeatedly to set the hour, and then press ENTER . Use the procedure above to set the minutes. 1 Make sure the power cord and speaker Remove any obstacles between the remote and the remote sensor on the unit, and position the unit away from fluorescent lights. 2 Find your problem in the checklist below, If the STANDBY indicator flashes Immediately unplug the power cord, and check the following item. [. . . ] This system supports security functions that comply with the BLUETOOTH specification as a means of ensuring security during communication using BLUETOOTH technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using BLUETOOTH technology. ⷠSony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using BLUETOOTH technology. ⷠBLUETOOTH communication is not necessarily guaranteed with all BLUETOOTH devices that have the same profile as this system. [. . . ]