User manual SONY CMT-V10IPN

[. . . ] 4-462-380-11 (1) Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Location of Controls Unit (Top) Remote To use the remote Remove the battery compartment lid, and insert the two supplied R6 (size AA) batteries,  side first, matching the polarities shown below. Operations Playing a CD/MP3 disc 1 Select the CD function. Press CD FUNCTION  on the remote or press FUNCTION  on the unit repeatedly. Personal Audio System GB Operating Instructions License and Trademark Notice  iPhone®, iPod®, iPod nano®, and iPod touch® are trademarks of Apple Inc. , registered in the U. S. LightningTM is a trademark of Apple Inc. [. . . ]  Set the “EQ” setting of the iPod/iPhone to “Off ” or “Flat. ” Discs that this system CANNOT play The iPod/iPhone does not function. To cancel the timer 2 Select the play mode. Press PLAY MODE  repeatedly until “PGM” appears while the player is stopped. Repeat the same procedure as above until “OFF” appears . in step 3, and then press 3 Select a folder (MP3 disc only). Press folder. +/  repeatedly to select the desired 4 Press  to register the station. 5 Repeat steps 1 through 4 to register other stations. You can preset up to 20 FM and 10 AM stations. Changing the display To Change information on the display1) Change Display mode (see below. ) 1) To change the setting Start over from step 1. Notes To tune in to a preset radio station 4 Select the desired track or file. Press /  repeatedly until the desired track or file number appears. If you registered a radio station to a preset number 1 to 6, the radio station will be tuned in by just pressing the TUNER MEMORY NUMBER (1 to 6)  when the system function is set to FM or AM. If you registered a radio station to a preset number 7 or higher, press TUNING MODE  repeatedly until “PRESET” appears then press +/  repeatedly to select the desired preset number. Press DISPLAY  repeatedly when the system is on. DISPLAY  repeatedly when the system is off. For example, you can view CD/MP3 disc information, such as:  If the sound source for a Play Timer is set to an FM/AM station tuned in using auto scanning or manual scanning, when you change the radio station after setting the Play Timer, radio station tuning for the Play Timer will also changed.  If the sound source for a Play Timer is set to an FM/AM station with a registered preset number, the radio station tuning for the Play Timer is fixed at what you set for it. Even if you change the radio station after setting the Play Timer, the radio station setting for the Play Timer will not change.  Shut down any other iOS applications running on the iPod/iPhone. For details, refer to the operation manual supplied with the iPod/iPhone.  Make sure the iPod/iPhone is connected securely.  Make sure the iPod/iPhone is updated with the latest software. If not, update the iPod/iPhone before using with the system.  Because the operation of the system and the iPod/ iPhone are different, you may not operate the iPod/ iPhone using buttons on the remote or unit. In this case, use the control buttons on the iPod/iPhone. The iPod/iPhone cannot be charged. CD-DA disc Notes for the iPod/iPhone user  emaining playing time of a track during playback r  otal remaining playing time t Selected track or file Total playing time number Total playing time for all the programmed tracks or files, including the selected track or file, is displayed at right on the panel. MP3 disc device  Make sure the iPod/iPhone is not playing when using the Play Timer.  The Play Timer may not be activated depending on the status of the connected iPod/iPhone.  Make sure the iPod/iPhone is connected securely.  If you cannot fully charge the iPod/iPhone, charge it again after turning the Automatic Standby function off.  CD-ROM  CD-R/CD-RW other than those recorded in music CD format or MP3 format conforming to ISO9660 Level 1/Level 2, Joliet  CD-R/CD-RW of poor recording quality, CD-R/CD‑RW that have scratches or are dirty, or CD‑R/CD-RW recorded with an incompatible recording device  CD-R/CD-RW which is finalized incorrectly  Discs containing files other than MPEG 1 Audio Layer3 (MP3) files  Discs of non-standard shape (for example, heart, square, star)  Discs that have adhesive tape, paper, or sticker attached to them  Rental or used discs with attached seals where the glue extends beyond the seal  Discs that have labels printed using ink that feels tacky when touched Input AUDIO IN (stereo mini jack): Sensitivity 900 mV, impedance 47 kilohms CD player section System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44. 6 µW * This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Frequency response: 20 Hz  20 kHz Signal-to-noise ratio: More than 80 dB Dynamic range: More than 80 dB Tuner section Antenna: FM lead antenna AM loop antenna FM tuner section Tuning range: 87. 5 MHz  108. 0 MHz (100 kHz step) AM tuner section Tuning range: 530 kHz  1710 kHz (10 kHz step) 531 kHz  1710 kHz (9 kHz step) Tuner Severe hum or noise, or stations cannot be received. (“TUNED” or “STEREO” flashes on the display. )  Connect the antenna properly.  Find a location and an orientation that provide good reception, and then set up the antenna again.  Keep the antennas away from the power cord to avoid picking up noise.  Turn off nearby electrical equipment. Notes on discs iPod/iPhone section Playing the iPod/iPhone 1 Select the iPod function. Press iPod FUNCTION  on the remote or press FUNCTION  on the unit repeatedly.  rack or file name (“ ”) t  rtist name (“ ”) a  lbum name (“ a ”) Tip The Play Timer setting remains in effect as long as the setting is not canceled manually and clock setting is completed. The system offers the following display modes. Display mode Power Saving mode1) When the system is off The display is turned off to conserve power. The timer and clock continue to operate. The clock is displayed. 5 Program the selected track or file.  to enter the selected track or file. [. . . ]  Point the remote at the system’s sensor .  Move the remote closer to the system. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pads, scouring powder, or solvents, such as thinner, benzine, or alcohol. You can wake up to CD, FM/AM reception, or iPod/ iPhone at a preset time. Make sure you have set the clock. CD/MP3 disc The sound skips, or the disc will not play.  Wipe the disc clean, and replace it. [. . . ]