User manual SONY CMT-VP100

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. This system can play the following discs Disc logo Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. This system conforms to VIDEO CDs without PBC functions (Ver. [. . . ] Recording from a CD/VIDEO CD (CD Synchro Recording) Load a recordable tape into the cassette holder. Turn FUNCTION (or press FUNCTION on the remote repeatedly) to select the source you want to record from. Turn FUNCTION (or press FUNCTION on the remote repeatedly) until "CD" appears in the display. " To start recording on the side facing away from you, press TAPE Y until " . Press DIR MODE on the remote repeatedly to select " " to record on one side of " or " " to record on both sides. Press TAPE X, and then start playing the desired source. Recording CD/VIDEO CD tracks in your favorite order To timer-record, make sure that you have set the system clock correctly (see "Setting the time" on page 8) and preset the radio station (see "Presetting radio stations" on page 14). To start recording on the side facing away from you, press TAPE Y (or N on the " changes to " . "ON TIME" appears, then the hour indication flashes. Repeatedly to select " " to record on one side of the tape, or " " or " " to record on both sides. Press +/­ on the remote repeatedly to set the hour, then press ENTER on the remote. "OFF TIME" appears, then the hour indication flashes again. Press PLAY MODE repeatedly until "PGM" disappears from the display. The start time, the stopping time, "TUNER", and the preset station appear in turn, then the original display returns. When the recording starts, the volume level is automatically set to the minimum. Press CLOCK/TIMER SELECT on the remote repeatedly until "c REC" disappears from the display. Once you set the timer, the time settings will remain in the system's memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again. The system will turn on 15 seconds before the specified starting time. ⷠIf the system is turned on at the specified starting time, recording will not occur. ⷠWhen you have set the Sleep Timer, the timer recording will not operate until the Sleep Timer Function is turned off. Generating a more dynamic sound (Dynamic Sound Generator) Press DSG. [. . . ] The tape does not record or play, or there is a decrease in sound level. There is excessive wow or flutter, or the sound drops out. Noise increases or the high frequencies are missing. The following measured at 230 V AC, 60 Hz DIN power output (rated): 27 + 27 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 32 + 32 W (6 ohms at 1 kHz, 10% THD) The following measured at 220 V AC, 60 Hz DIN power output (rated): 23 + 23 W (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference): 26 + 26 W (6 ohms at 1 kHz, 10% THD) Inputs AUDIO IN MD (VIDEO) (phono jacks): Sensitivity 500/250 mV, impedance 47 kilohms MIC IN (minijack): Sensitivity 1 mV, impedance 10 kilohms Outputs OPTICAL DIGITAL OUT (CD): Optical VIDEO OUT (phono jack): max. [. . . ]