User manual SONY CMT-VP11

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. This system can play the following discs Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This system is equipped with the Dolby* B-type noise reduction system. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. [. . . ] Depending on where you stopped the VIDEO CD, the system may resume playback from a different point. ⷠThe point at which you stopped playback is cleared when: -- you press a numeric button on the remote, PLAY MODE, or CD x. If "RESUME" does not appear, Resume Play is not available. Playback starts from the point you stopped the VIDEO CD in step 1. To view from the beginning of the VIDEO CD When "RESUME" appears in the display, press CD x, then press CD u. The Repeat Play function lets you playback a single track or all the tracks on a CD/VIDEO CD repeatedly in Normal Play. You can also use Repeat Play function while in Shuffle Play or Program Play. Playing CD/VIDEO CD tracks in random order -- Shuffle Play You can use this function to playback all the tracks on a CD/VIDEO CD in random order. The following table describes the two repeat modes. To repeat All the tracks on the CD/VIDEO CD Only the currently playing track Press REPEAT repeatedly until "REPEAT" appears. ";" appears while the next track is being selected, and all the tracks play in random order. You can also start Shuffle Play during Normal Play by selecting "SHUFFLE". You cannot go back to the preceding track by pressing CD . Playing CD/VIDEO CD tracks in a favorite order ­­ Program Play You can make a program of up to 20 tracks on a CD/VIDEO CD in any order that you want. After setting the order, you can also make a synchronized tape recording of the tracks (see page 31). "STEP" appears, followed by the number of the selection just programmed. The tracks play in the order that they were programmed. Add a track to the end Do steps 3 and 4 with of the program Program Play stopped. The program you made remains in the system's memory until you turn off the system or remove the disc. After the program finishes, press CD u to play the program again. ⷠWhen the total playing time of the programmed tracks exceeds 100 minutes, "- - . If you try to program more than 20 tracks, "PGM FULL" appears in the display. [. . . ] You can also operate the system with the supplied remote. Buttons marked with "*" are provided only on the remote. Playback using the menu screens recorded on VIDEO CDs with PBC functions. You can enjoy simple interactive software using the menu playback function. [. . . ]