User manual SONY CMT-Z100IR

[. . . ] WARNING To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] Select the AUDIO function. Press FUNCTION +/ repeatedly. EQ repeatedly to select "BASS" or "TREBLE, " and then press +/ repeatedly to adjust the level. Start playback. Start playback of the connected component and adjust its volume. Adjust the volume. Press VOLUME +/. 1GB Turning off the beep sound You can turn off the beep sounds of the system. Use buttons on the unit to perform the following procedure. Changing the display To Change information on the display1) Check the clock when the system is off 1) 1 2 Turn on the system. Press . Press DISPLAY repeatedly when the system is on. The clock is displayed for 8 seconds. Hold down , then press DISPLAY MODE until "BEEP OFF" appears. To turn on the beep sound Repeat the procedure, until "BEEP ON" appears. 2) For example, you can view disc information or the USB device information, such as; track or file number during normal play. track or file name (" ") during normal play. artist name (" ") during normal play. album or folder name (" ") during normal play. total playing time while the player is stopped. You can also view DAB station information (CMT-Z100DiR only) such as the service name, channel label, preset number, frequency, DLS (Dynamic Label Segment), or ensemble label. The STANDBY indicator on the unit lights up when the system is off. GB The system offers the following display options. Display option When the system is off, Demonstration The demonstration indicator is displayed. Power Saving The display is turned Mode off to conserve power. The timer and clock continue to operate. * For your convenience, even when the main display is turned off, the main display may automatically turn on under certain circumstances. The following are examples: the main display is turned on for 8 seconds to confirm settings or mode status. the main display is turned on until your operation is completed, when you perform setting operations. Operations Notes on the display information Characters that cannot be displayed appear as "_". The following are not displayed: total playing time and remaining playing time for an MP3 disc and USB device. remaining playing time for an MP3 file. The following are not displayed correctly: elapsed playing time of an MP3 file encoded using VBR (variable bit rate). folder and file names that do not follow either the ISO9660 Level 1, Level 2 or Joliet in the expansion format. To change the display mode The main and sub displays can be turned on and off. The system offers the following display modes for combination of the main and sub displays. Press DISPLAY MODE repeatedly to change the display mode. The system offers the following display modes. Display mode Combination of main and sub displays DISP MODE1 The main display is (default setting) off. * The sub display is on. DISP MODE3 Both displays are on. Continued GB The following are displayed: elapsed playing time of a track. remaining playing time of a current CD-DA disc during normal play. [. . . ] Before installing the system on the wall Make sure that the wall is strong enough to support the wall mounting. The wall should be able to support the weight of at least 20 times that of this system. See "Specifications" (page 47) for the weight of this system. Make sure that the power cord is disconnected from the wall outlet. [. . . ]