User manual SONY CMT-CP1

[. . . ] Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. Notice for the customer in the countries applying EU Directives According to the EU Directive related to product safety, EMC and R&TTE, the manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. [. . . ] Press TUNER MEMORY . Preset number 3 Press +/ repeatedly to select your desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. 4 5 Press ENTER . Repeat steps 1 through 4 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. 0GB Using the Timers The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. 6 7 Select the sound source. Press / repeatedly until the desired sound source appears, and then press ENTER . The display shows the timer settings. Press / to turn off the system. The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play. Other Operations Press SLEEP repeatedly. If you select "AUTO, " the system automatically turns off after the current disc stops or in 100 minutes. Play Timer: You can wake up to CD, tuner or optional USB device at a preset time. Use buttons on the remote to control the Play Timer. Make sure you have set the clock. To activate or check the timer again Press CLOCK/TIMER SELECT , press / repeatedly until "PLAY SEL?" appears, and then press ENTER . To cancel the timer Repeat the same procedure as above until "TIMER OFF?" appears, and then press ENTER . 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/ to adjust the volume. Place the speakers as symmetrically as possible. Connect only the supplied speakers. GB Play does not start from the first track. Press PLAY MODE repeatedly until both "PGM" and "SHUF" disappear to return to normal play. Starting playback takes more time than usual. The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc that has not been finalized (a disc to which data can be added). a disc that has many folders. There is no sound. The USB device is not connected correctly. Turn off the system, then reconnect the USB device and check if the USB MEMORY indicator lights up. The bit rate used when encoding the files was low. [. . . ] Do not clean discs with solvents, such as benzine thinner, or commercially available cleaners or anti-static spray intended for vinyl LPs. Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. GB On safety Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. [. . . ]