User manual SONY CMT-EP515

[. . . ] 4-246-169-11(1) Micro Hi-Fi Component System Operating Instructions Owner's Record The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. CMT-EP515 ©2003 Sony Corporation WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. [. . . ] * This is not affect the recording volume: it only adjusts the volume for when the radio turns on at the preset time. Press TAPE nN, if you want to switch the direction. repeatedly to select "g" to record on one side or "h" to record on both sides. · You cannot activate the Daily Timer and recording timer at the same time. · If you use the recording timer and the Sleep Timer at the same time, the Sleep Timer has priority. · Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). · If the system is on about 15 seconds before the preset time, the timer recording will not be activated. · The volume is reduced to minimum during recording. · If the system is in the recording or recording pause mode at the preset time, the timer recording will not be made. · If the system is playing back a tape at the preset time, the system will switch to the timer, but the timer recording will not be made. 7 8 9 10 Press PLAY MODE/DIRECTION 11 Press ?/1 to turn off the system. 15GB Display Turning off the display -- Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY. Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. Checking the remaining time (CD) Press DISPLAY repeatedly. To cancel Power Saving Mode Press DISPLAY. Tips Each time you press the button, the display changes cyclically as follows: During playback Elapsed playing time on the current track*1 t Remaining time on the current track*2 t Remaining time on the current disc t Clock display (for six seconds) *1"­ ­:­ ­" appears when the total playing time of the · The STANDBY indicator lights up even in the Power Saving Mode. · The timer continues to operate in Power Saving Mode. program exceeds 100 minutes, when the program contains 31 tracks or more, or when a disc with 31 tracks or more is played in Shuffle Play mode. *2"­ ­:­ ­" appears when a track is played whose number is 31 or over. In the stop mode Total number of tracks and total playing time t Clock display (for six seconds) 16GB Optional Components Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. Optional Components From the audio output jacks of an optional analog component Optional analog component A MD IN jacks Use audio cords (not supplied) to connect an optional analog component (MD deck, etc. ) to these jacks. You can then listen to the sound from the component. Recording audio from a connected component 1 Connect audio cords. 2 Start recording manually. See "Recording on a tape manually" on page 12. Listening to audio from a connected component 1 Connect audio cords. See "Hooking up optional components" on page 17. 2 Press MD. Start playing the connected component. 17GB Troubleshooting Sound lacks bass. · Check that the speaker's + and ­ terminals are connected correctly. · A TV or VCR is placed too close to the stereo system. Move the stereo system away from the TV or VCR. · Connect the system to a different wall outlet. · Install a noise filter (commercially available) to the power line. · Set the clock correctly (page 5). · Check the timer setting and set the correct time (pages 14 and 15). · Cancel the Sleep Timer function (page 13). · You cannot activate the timer recording and Daily Timer at the same time. [. . . ] Do not use such discs. Note on CD-R/CD-RW playback Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition or the drive's characteristics. Besides, the discs, which are not yet finalized at the end of recording, cannot be played back. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. [. . . ]