User manual SONY CPD-101VS

[. . . ] The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your dealer regarding this product. If shipped to USA/Canada, install only a UL LISTED/CSA LABELLED power supply cord meeting the following specifications: SPECIFICATIONS Plug Type Nema-Plug 5-15p Cord Type SVT or SJT, minimum 3 × 18 AWG Length Maximum 15 feet Rating Minimum 7 A, 125 V To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] You can, however, adjust the picture to your preference by following the procedure described below. Beyond sound volume and picture contrast adjustment, most adjustments are made using the OSD menu system. You can adjust the size in horizontal or vertical direction individually. The horizontal and vertical frequencies for each input signal received appear. The VOLUME/CONTRAST OSD disappears three seconds after you release the buttons. P To activate Bass Boost for rich bass sound 1. Tip If you don't touch any buttons, the OSD automatically disappears after 30 seconds. The ¤ indicator appears while the sound is muted. On the VOLUME/CONTRAST OSD while the sound is muted. The horizontal and vertical frequencies for each input signal received appear. + for more contrast ­ for less contrast The VOLUME/CONTRAST OSD disappears three seconds after you release the buttons. Tip If you don't touch any buttons the OSD automatically disappears after 30 seconds. Tip If you don't touch any buttons, the OSD automatically disappears after 30 seconds. Tip If you don't touch any buttons, the OSD automatically disappears after 30 seconds. All other data becomes the individual setting for each input signal received. ROTATION / to rotate the picture clockwise / to bend both sides outward / to bend both sides to the right / to widen the top / to move the top to the right ?Tip If you don't touch any buttons, the OSD automatically disappears after 30 seconds. 11000K for the brightest white 9300K for TV white 6500K for video monitor white 5000K for printing paper white Tip If you don't touch any buttons, the OSD automatically disappears after 30 seconds. Adjust the convergence to eliminate red or blue shadows that may appear around letters or lines on the screen. Tip If you don't touch any buttons, the OSD automatically disappears after 30 seconds. This adjustment is to eliminate wavy or elliptical lines that may appear on the screen. Tip If you don't touch any buttons, the OSD automatically disappears after 30 seconds. [. . . ] m If the GPE mode is set to AUTO , change it to OFF (page 33). Picture appears to be ghosting m Eliminate the use of video extensions and/or video switch boxes if this symptom occurs. Excessive cable length or weak connections can produce this symptom. M Due to the relationship between resolution, display dot pitch and the pitch of some image patterns, certain screen backgrounds sometimes show moiré. [. . . ]