User manual SONY CPD-200GS

[. . . ] The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] While muting the sound, the mark appears in the SOUND OSD instead of the Á mark. Most adjustments are made using the MENU OSD. Once the setting is adjusted , it will be stored in memory for all input signals received. This MENU OSD contains links to the other OSDs described below. The brightness and contrast are both reset to the factory settings. Once the setting is adjusted, it will be stored in memory for the current input signal. The SIZE settings allow you to adjust the size of the picture. Once the setting is adjusted, it will be stored in memory for the current input signal. To move the picture left To move the picture up . To move the picture down The horizontal and vertical sizes are both reset to the factory settings. The horizontal and vertical centerings are both reset to the factory settings. Once the rotation is adjusted, it will be stored in memory for all input signals received. All other adjustments will be stored in memory for the current input signal. To move the picture sides to the right To move the picture sides to the left Adjust the picture rotation adjust the picture sides adjust the picture side balance adjust the picture width adjust the picture shape balance To move the top of the picture to the right To move the top of the picture to the left Once the setting is adjusted, it will be stored in memory for the current input signal. For example, you can change the colors of a picture on the screen to match the actual colors of the printed picture. Once the setting is adjusted, it will be stored in memory for all input signals received. If you are using Graphic Picture Enhancement (GPE) If you are in one of the GPE modes, the following COLOR OSD appears when " COLOR" is selected. The picture zoom adjustment will stop as soon as either the horizontal or vertical size reaches its maximum or minimum value. This OSD allows you to reduce the color temperature from 11, 000K to 9, 300K. For more information on using GPE, See "Selecting the Graphic Picture Enhancement (GPE) Mode" on page 16. Adjust convergence settings to eliminate red or blue shadows that may appear around objects on the screen. Adjust the CANCEL MOIRE function to eliminate wavy or elliptical lines that may appear on the screen. [. . . ] the degauss function demagnetizes the metal frame of the CRT to obtain a neutral field for uniform color reproduction. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. If red or blue shadows appear along the edges of images, adjust the convergence (pages 12 ­ 13). Common causes for this symptom are electric fans, fluorescent lighting or laser printers. [. . . ]