User manual SONY CPD-210EST

[. . . ] The model and serial numbers are located at the rear of the unit. record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] You can reset the adjustments using the RESET menu. Adjusting the horizontal size or centering of the picture (H-SIZE/ CENTER) These settings are stored in memory for the current input signal. These settings are stored in memory for the current input signal. Then press the +/- buttons to make - the adjustment. Then press the +/- buttons to make - the adjustment. To expand or contract the picture sides shift the picture sides to the left or right Adjusting the vertical size or centering of the picture (V-SIZE/ CENTER) These settings are stored in memory for the current input signal. These settings are stored in memory for the current input signal. Then press the +/- buttons to make - the adjustment. Then press the +/- buttons to make - the adjustment. To adjust the picture width at the top of the screen shift the picture to the left or right at the top of the screen This setting is stored in memory for all input signals. The COLOR settings allow you to adjust the picture's color temperature by changing the color level of the white color field. This setting is stored in memory for all input signals. This setting is stored in memory for the current input signal. Since the default setting is 9300K, the whites will change from a bluish hue to a reddish hue as the temperature is lowered to 6500K and 5000K. Then press the ENTER button to select R (red), G (green), or B (blue) and press the +/- buttons to make the adjustment. Note Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value. If you fine tune the color temperature, the new color settings are stored in memory and recalled whenever you select USER. This monitor has the following two reset methods. Reset the settings according to the following instructions. Adjust the selected item according to the following instructions. Note that the following items are not reset by this method: · The monitor is automatically demagnetized when the power is turned on. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. [. . . ] The requirements cover a wide range of issues: environment, ergonomics, usability, emission of electrical and magnetic fields, energy consumption and electrical and fire safety. The environmental demands concern restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental plan which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/ or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. [. . . ]