User manual SONY CPD-E100E

[. . . ] The model and serial numbers are located at the rear of the unit. record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] If the signal matches one of this monitor's factory preset modes, the resolution is also displayed. Move the control button left (<) or right (, ) to make the adjustment. Press the center of the control button once to return to the main MENU, and press again selecting EXIT to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds. Adjusting the horizontal size or centering of the picture (H-SIZE/ CENTER) These settings are stored in memory for the current input signal. These settings are stored in memory for the current input signal. Then move the control button </, to make the adjustment. Select PIN PIN BALANCE To expand or contract the picture sides shift the picture sides to the left or right Then move the control button </, to make the adjustment. Adjusting the vertical size or centering of the picture (V-SIZE/ CENTER) These settings are is stored in memory for the current input signal. These settings are stored in memory for the current input signal. Then move the control button </, to make the adjustment. Select KEY KEY BALANCE To adjust the picture width at the top of the screen shift the picture to the left or right at the top of the screen Then move the control button </, to make the adjustment. This setting is stored in memory for all input signals. The COLOR settings allow you to adjust the picture's color temperature by changing the color level of the white color field. This setting is stored in memory for all input signals. This setting is stored in memory for the current input signal. Since the default setting is 9300K, the whites will change from a bluish hue to a reddish hue as the temperature is lowered to 6500K and 5000K. Then move the control button m/M to select R (red), G (green), or B (blue) and move </, to make the adjustment. Note Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value. If you fine tune the color temperature, the new color settings are stored in memory and recalled whenever you select USER. This monitor has the following three reset methods. Use the control button to select the adjustment item you want to reset, and press the RESET button. [. . . ] The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/ or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. the length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability. [. . . ]