User manual SONY CPD-E215E

[. . . ] The model and serial numbers are located at the rear of the unit. record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. If shipped to USA/Canada, install only a UL LISTED/CSA LABELLED power supply cord meeting the following specifications: SPECIFICATIONS Plug Type Nema-Plug 5-15p Cord Type SVT or SJT, minimum 3 × 18 AWG Length Maximum 15 feet Rating Minimum 7 A, 125 V To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] Highlight the desired menu by moving the control button towards the rear to go up (M), towards the front to go down (m), and left (<) or right (, ) to move sideways. Move the control button left (<) or right (, ) to make the adjustment. This setting is stored in memory for the current input signal. Press the center of the control button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds. Adjusting the size of the picture (SIZE) This setting is stored in memory for the current input signal. This setting is stored in memory for the current input signal. The COLOR settings allow you to adjust the picture's color temperature by changing the color level of the white color field. This setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal. Since the default setting is 9300K, the whites will change from a bluish hue to a reddish hue as the temperature is lowered to 6500K and 5000K. Then move the control button m/M to select R (red), G (green), or B (blue) and move the control button </, to make the adjustment. Then move the control button </, to make the adjustment. Select (ROTATION) (PIN) (PIN BALANCE) (KEY) To rotate the picture expand or contract the picture sides shift the picture sides to the left or right adjust the picture width at the top of the screen If you fine tune the color temperature, the new color settings are stored in memory and recalled whenever you select USER. (KEY BALANCE) shift the picture to the left or right at the top of the screen This monitor has the following three reset methods. Use the control button to select the adjustment item you want to reset, and press the RESET button. Adjust the selected item according to the following instructions. Note that the following items are not reset by this method: · The monitor is automatically demagnetized when the power is turned on. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. Press and hold the RESET button for more than two seconds. Then move the control button </, until the moire effect is at a minimum. * Moire is a type of natural interference which produces soft, wavy lines on your screen. [. . . ] The energy requirements include a demand that the computer and/ or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. the length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability. Below you will find a brief summary of the environmental requirements met by this product. [. . . ]