User manual SONY CRU-52SG13

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. [. . . ] Note Setting the output signal Getting Started Setting the HDMI signal output You can set whether audio signals are output from the HDMI OUT jack or not. HDMI Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. Each time you press HDMI, the HDMI mode is activated or disactivated. Audio signals are output from the ANALOG OUT jacks, PHONES jack, and DIGITAL OUT (CD) jacks (the default setting). hDMI ON mode: The HDMI OUT jack outputs audio signals. The HDMI button lights up in green, and “HDMI ON” appears on the display. Note • Operate the HDMI button during playback stop. €¢ Operate the HDMI button when the disc tray is closed. Continued 15GB Setting the digital signal output of CDs You can set whether audio signals are output from the DIGITAL OUT (CD) jacks or not. This setting is effective in the HDMI OFF mode. In the HDMI ON mode, no sound is output from the DIGITAL OUT (CD) jacks, irrespective of the DIGITAL OUT (CD) switch setting. With the label side up 19GB Using the Display The display shows information about the disc or track being played. This section describes the current disc information and information that appears for each status of the player. TIME/TEXT Display Displaying the information TEXT discs contain information, such as the disc name or artist name, as well as the audio signals. This player can display the disc name, artist name, and current track name as TEXT information. If a name has 14 or more characters, the first 14 characters will remain after the name scrolls by on the display. Before you start playing a disc Press TIME/TEXT repeatedly. Each time you press the button, the disc name or artist name appears on the display. When you select the artist name, “ART. Disc title* Artist name* Total number of tracks and total playing time TIME/TEXT DISPLAY * When there is no disc title, or artist name, “NO TEXT” appears. Disc information when a disc is loaded The display shows the total number of tracks and total playing time. A: Hybrid disc B: Currently loaded disc and number of playable channels C: HDMI signal output D: Playback mode E: Total playing time F: Total number of tracks 20GB While playing a disc Press TIME/TEXT repeatedly. [. . . ] €¢ If you connect an HDMI component, such as a TV, to an output jack of the amplifier while listening to sound via the HDMI connection, the sound may be lost momentarily. Depending on the connected component, sound may be terminated. This is not a malfunction of the player. 28GB No video is output from the HDMI OUT jack. [. . . ]