User manual SONY CRU-55SG11

[. . . ] For FM radio, connect the supplied wire antenna (aerial) into the inner socket and extend it for the best reception. Alternatively, connect your own external antenna (aerial). You can also connect your iPod or iPhone to the system and your TV via the supplied dock. or 08 Progress The system has built in Wi-Fi to allow you to connect to the internet and home network services. [. . . ] or 08 Progress The system has built in Wi-Fi to allow you to connect to the internet and home network services. If you don't have access to a wireless network, you can also connect with a LAN cable. Network settings can be found in the home menu - see p. 15. For further details about network connections, visit: http://support. sony-europe. com To a broadband router 09 3 Once all of your devices are connected, you can plug in the AC adapter. The clamps can be used to tidy the cables. FM wire antenna (aerial) AC adapter 10 Progress Now you can re-attach the panel and stand covers, then plug in the AC power cords (main leads) of the main unit and subwoofer to the AC power outlet (mains). 11 3 After connecting the AC power cords (mains leads) to the AC power outlet (mains), "WELCOME" appears in the front panel display of the main unit. Press / on the main unit to turn the system on; the LINK/STANDBY indicator of the subwoofer turns green. Cable setup is complete! / 12 Progress 4 Now for the on-screen Easy Setup You can use the supplied Blu-ray remote (shown below) to go through the on-screen set up. If the Blu-ray menu screen does not appear automatically, use your TV remote to select the correct AV input in your TV's menu. Once you see the message, [Easy Set up is now complete] on the screen, simply select [Finish] and the system is ready to use. / ///, HOME 13 5 To play a disc, simply insert one into the disc slot with the labeled side facing the front. Make sure that the wireless transceiver is inserted correctly into the main unit. Move the subwoofer so that the LINK/STANDBY indicator turns green or orange. Move the system away from other wireless devices. Check the speaker connections. There is no sound or wireless transmission is not activated. The disc does not play. Check the status of the LINK/STANDBY indicator on the subwoofer. Check that the AC power cord (mains lead) of the subwoofer is connected securely. Turn the subwoofer on by pressing / on the subwoofer. region code on the BD/DVD does not match the The system. Moisture has condensed inside the main unit and may cause damage to the lenses. Remove the disc and leave the main unit turned on for about half an hour. [. . . ] Moisture has condensed inside the main unit and may cause damage to the lenses. Remove the disc and leave the main unit turned on for about half an hour. system cannot play a recorded disc that is not The correctly finalized. 17 Reducing power usage to less than 0. 3 W in Standby Mode Press HOME, and then press /// to select [Setup] in [System Settings]. [. . . ]