User manual SONY CSDA660

[. . . ] Allow 10 cm (4 in. ) clearance from the rear and the top of the unit and 5 cm (2 in. ) from each side. - Do not place the unit on a bed, rug, or similar surface that may block the ventilation openings. - Do not install the unit in a bookcase, cabinet, or airtight rack where ventilation may be impeded. 5 Objects and liquid entry - Take care that objects or liquids do not get inside the unit through the ventilation openings. [. . . ] Position the unit for the best reception. Press * e PLAY/PAUSE to start play. The number of the track being played is displayed. * or c PLAY on the remote control If an FM stereo broadcast contains noise Select FM MONO with BAND. Noise is reduced although reception is monaural. To restore stereo reception, select FM STEREO. * OSC/SLEEP If a high-pitched sound is heard while listening to radio or recording from an AM station, press the button repeatedly until the noise is reduced. * or MODE on the remote control NOTE If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit. s STOP/MEMORY ­ Stops play. * or a PAUSE on the remote control r, t SKIP/SEARCH ­ Searches for a particular point during playback. Keep r or t pressed and then release it. ­ Skips to the beginning of a track. REPEAT ­ Repeats a single track or all tracks. The REPEAT indicator flashes: A single track is played repeatedly. The REPEAT indicator lights up: All tracks are played repeatedly. 4 ENGLISH 0-9, +10 B SKIP/SEARCH PLAY/PAUSE STOP/ MEMORY REPEAT c PLAY r, t s STOP MODE a PAUSE To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function). If you load a disc while the CD indicator flashes in step 2, play starts without pressing e. To select a track directly with the remote control, press the numbered buttons 0-9 and +10. CD play starts from the selected track and continues to the last track. Example: To select number 25, press +10, +10 and 5. After listening, press TAPE/POWER/6STANDBY to turn the power off. PROGRAMMED PLAY Up to 20 tracks can be programmed from the disc. 1 In stop mode, keep * s STOP/MEMORY pressed until program number flashes in the display. * or s STOP on the remote control Program number 2 Press * r, t to select a track, then press s STOP/MEMORY to store it. The next program number starts flashing. * or the numbered buttons 0-9 and +10 on the remote control En NOTE · Do not use irregular shape CDs (example: heartshaped, octagonal ones). · Do not place more than one disc in the disc compartment. · Do not try to open the disc compartment during play. · The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms. · Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. [. . . ] ENGLISH 9 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]