User manual SONY CSDFD92

[. . . ] OPERATING INSTRUCTIONS INSTRUCCIONES DE MANEJO MODE D'EMPLOI CSD-FD92 CSD-FD82 COMPACT DISC STEREO RADIO CASSETTE RECORDER RADIOCASETE ESTÉREO CON REPRODUCTOR DE DISCOS COMPACTOS RADIO-CASSETTE LECTEUR DE CD STEREO English : See page 2. Español : Ver la página 12. Français : Voir page 22. En E F 8B-CHE-903-01 001225ACK-I-M U WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Precautions Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. [. . . ] Do not use strong solvents such as alcohol, benzine or thinner. To clean the heads When the tape heads are dirty; - high frequency sound is not emitted - the sound is not adequately high - the sound is off-balance - the tape cannot be erased - the tape cannot be recorded on After every 10 hours of use, clean the tape heads with a head cleaning cassette. Use separately sold dry-type or wet-type cleaning cassette. Refer to the instructions of the cleaning cassette for details. FUNCTION POWER To clean the lens Use a cotton swab slightly moistened with cleaning fluid. Wipe gently from the center to the edge. Lens ENGLISH 5 PHONES \ VOL TUNER / BAND POWER STANDBY/ ON 6 QSOUND, T-BASS, 3-MODE EQ REPEAT / MODE / SLEEP UP, DOWN a PAUSE / SET s STOP / CLEAR d PLAY / DIR / PRESET ( c PLAY / PRESET) r, t (TUNING -, +) A 1 TUNER OPERATION * REPEAT/MODE/SLEEP - If an FM stereo broadcast contains noise, press the button so that is displayed. Noise is reduced, although reception is monaural. To restore stereo reception, press the button again. - If a high-pitched sound is heard during AM recording, press the button repeatedly to display "b1" or "b2", so as to eliminate the noise. * or MODE on the remote control Press * TUNER/BAND repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received. * or BAND on the remote control (applicable when the AC cord is connected) 2 Press r, t (TUNING -, +) to select a station. To change the AM tuning interval The default setting of the AM tuning interval is 10 kHz/ step. If you use the unit in an area where the frequency allocation system is 9 kHz/step, change the interval as follows. 2 Press POWER STANDBY/ON6 while pressing TUNER/BAND. When the AM tuning interval is changed, the preset stations are cleared. After listening, press POWER STANDBY/ON6 to turn the power off. For better reception FM AM NOTE Extend the rod antenna and orient it for the best reception. Position the unit for the best reception. c PLAY on the remote control is also available. To select a preset number directly with the remote control Press the numbered buttons 0-9 and +10. Example: To select number 15, press +10 and 5. To select number 10, press +10 and 0. To clear a preset station Select the preset number first. The higher numbers in the band are decreased by one. ENGLISH 7 a PAUSE / SET CD POWER STANDBY/ ON6 REPEAT/ MODE/SLEEP s STOP / CLEAR d PLAY / DIR / PRESET ( c PLAY / PRESET) r, t B 1 2 CD OPERATION To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function). If you load a disc while the CD indicator flashes in step 2, play starts without pressing d (c). To select a track directly with the remote control, press the numbered buttons 0-9 and +10. CD play starts from the selected track and continues to the last track. Example: To select number 25, press +10, +10 and 5. [. . . ] The counter is also set to "0000" when opening the cassette holder. After listening, press POWER STANDBY/ON6 to turn the power off. Press w REC/REC MUTE to start recording. "REC" flashes on the display. When the selected function is CD, CD play and recording starts simultaneously. To record only the selected tracks of a CD 1 Follow steps 1 to 3 of PROGRAMMED PLAY on page 9 to program tracks. 2 Press w. 10 ENGLISH SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. c PLAY a PAUSE r, t s STOP 1 2 Hold down * REPEAT/MODE/SLEEP until "SLEEP" flashes in the display. * or MODE on the remote control Within 4 seconds, press r or t to specify the time until the power is turned off. Each time it is pressed, the time changes between 10 and 180 minutes in 10-minute steps. To stop recording, press s. [. . . ]