User manual SONY CSS-HD1

[. . . ] Before operating the product, please read this manual thoroughly and retain it for future reference. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. This set should be operated only from the type of power source indicated on the marking label. [. . . ] If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. This product has been tested and found compliant with the limits sets out in the EMC Directive for using connection cables shorter than 3 meters (9. The electromagnetic field at the specific frequencies may influence the picture and sound of this unit. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Refer to the operating instructions for your camera as well as this manual. theCyber-shotStationisnotadust-proofed , moist-proofed , orwaterproofedproduct. AbouttheMODELSELECTswitch The Cyber-shot Station allows you to attach your camera by setting the MODEL SELECT switch ( , ). Be sure to set the MODEL SELECT switch to the designated position before use, or it may cause a malfunction of your camera or the Cybershot Station. DonotuseorkeeptheCyber-shotStationinlocationssubjecttothefollowingconditions: Locations with extremes of temperature The temperature in closed automobiles during summer may be extremely hot, causing deformation or malfunction of the Cyber-shot Station. Locations under direct sunlight or near heaters This may cause deformation or a malfunction of the Cyber-shot Station. Locations subject to vibration Locations subject to strong magnetism Precautions: Even if the CHARGE lamp is not lit, the unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the unit, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). Use the nearest wall outlet to get the AC Adaptor plugged in. If any malfunctions occur using the product, unplug the AC Adaptor to cut off the power source. [. . . ] This indicates communication between the camera and the Cyber-shot Station, and it is not a malfunction. chargingtemperature The temperature range for charging is 0 °C to 40 °C (32 °F to 104 °F). However, to provide maximum battery efficiency, the recommended temperature range when charging is 10 °C to 30 °C (50 °F to 86 °F). onbatterylife The battery life is limited. [. . . ]