User manual SONY CWS-OD100/B

[. . . ] But, when using the optical digital connecting cord, the display is not illuminated. When you press the LIGHT button on the remote control, the display is illuminated for about 5 seconds. You can turn off the illumination of the display by first removing the rechargeable batteries or alkaline batteries; then while pressing the PLAY MODE button, reinsert the batteries. zOther Operations Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, INTRO PGM, shuffle or RMS (Random Music Sensor) play modes. Repeat all the tracks, only one track or the specified part within the same track. ^ p = + Playing only the tracks you want (INTRO PGM Play) You can choose and play your favorite tracks by scanning through the beginning of each track in a CD. ^ Playing tracks in the order you want (RMS play) You can program up to 22 tracks to play in any order you choose. ^ Using other functions To minimize skipping (ESP2) The ESP (Electronic Shock Protection) function minimize skipping by using a buffer memory that stores music data and plays it back in the event of a shock. [. . . ] · During play, the track number and the elapsed playing time of the current track appear. · During pause, the elapsed playing time flashes in the display. · Between tracks, the time to the beginning of the next track will appear with the "­" indication. 3 Press RPT/ENT again to set the point (point B) where you want to stop repeat play. Point B is stored in the memory, and repeat play starts from point A. Light up To cancel shuffle play, press P MODE repeatedly until the play mode indication disappears from the display. Note · During shuffle play, you cannot return to previous tracks by sliding the jog lever toward =. For the customers in Australia The supply cord of the AC power adaptor cannot be replaced; if the cord is damaged, the AC power adaptor should be discarded. 3 Play 2 Adjust the volume. To use the player Slide HOLD in the direction of the arrow. When you press any button, "Hold" appears in the display and you cannot operate the player. To unlock, slide HOLD back. For the customers not in Poland The mark on the unit is valid only for products marketed in Poland. To change points A and B, press and hold RPT/ENT until "A~B" flashes in the display, then do steps 2 and 3 again. To set points A and B on other tracks, slide the jog lever toward = or + to select another track, then do steps 2 and 3 again. If you press p, the stored points will be erased. To prevent accidental erasure, set the RESUME switch at the rear of the player to ON. For the customers not in Europe The CE mark on the unit is valid only for products marketed in the European Union. 1 Press ^. Continue to the reverse side m For the customers not in Russia This mark on the unit and package is valid only for products marketed in Russia. 1 Press the jog lever toward ^. 2 Adjust the volume. To cancel repeat play, press P MODE until "A~B" disappears from the display. To stop play, press p. To protect your hearing (AVLS) The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears. Using the optical digital connecting cord Using the supplied remote control You can use the remote control as the wired remote control. (Front) HOLD* Display window zPower Sources Using rechargeable batteries Charge the rechargeable batteries before using them for the first time. Use the NH-DM2AA or NC-DMAA rechargeable batteries for this player. ** Automatic Music Sensor ***Electronic Shock Protection This player is designed so that it cannot charge any other rechargeable batteries or dry batteries for safety reasons. The supplied rechargeable batteries (NH-DM2AA) or optional rechargeable batteries (NC-DMAA) General Power requirements For the area code of the model you purchased, check the upper left side of the bar code on the package. · Two Sony NH-DM2AA rechargeable batteries: 2. 4 V DC Two Sony NC-DMAA rechargeable batteries: 2. 4 V DC · Two LR6 (size AA) batteries: 3 V DC · AC power adaptor (DC IN 4. 5 V jack): U2/CA2/E92 model: 120 V, 60 Hz CED/CEX/CET/EE1/E13 model: 220 - 230 V, 50/60 Hz CEK model: 230 - 240 V, 50 Hz EA3 model: 110 - 240 V, 50/60 Hz AU2 model: 240 V, 50 Hz JE. W/E33 model: 100 - 240 V, 50/60 Hz HK2 model: 220 V, 50/60 Hz CN2/AR1 model: 220 V, 50 Hz · Sony DCC-E245 car battery cord for use on car battery: 4. 5 V DC Dimensions (w/h/d) (without projecting parts and controls) Approx. 131. 8 × 23. 9 × 142. 0 mm (5 1/4 × 31/32 × 5 5/8 in. ) Mass (without rechargeable batteries) Approx. 200 g (7. 0 oz) Operating temperature 5°C - 35°C (41°F - 95°F) 3 Note · Use only the supplied remote control. You cannot operate this player with the remote control supplied with other models. Connect the AC power adaptor. The indication "CHG" lights up. (If the battery has been already charged, "CHG" and flash. ) Note · Do not use manganese batteries for this player. Other rechargeable batteries or dry batteries To take out the dry batteries Take out the batteries properly in the same way as the rechargeable batteries. When you replace the rechargeable batteries with new ones, make sure to use the NH-DM2AA/ NC-DMAA rechargeable batteries. · Do not throw the batteries into fire. · Do not carry the batteries with coins or other metallic objects. [. . . ] Connect the AC power adaptor and charge the batteries. Replace them with new ones. Battery life (approx. hours) (EIAJ*) Battery life varies depending on how the player is used. to a wall outlet When using Playing a CD in a car 4 Connecting to other stereo equipment You can listen to the CD through other stereo equipment or record a CD on a cassette tape or a MiniDisc. Refer to the instruction manual of the other equipment for details. [. . . ]