User manual SONY CXLDV700

[. . . ] DVD Stereo System XR-DV700 U OPERATING INSTRUCTIONS En (English) MANUAL DE INSTRUCCIONES E (Español) MODE D'EMPLOI F (Français) For assistance and information (United States and Puerto Rico) 8B-CQA-903-01 010420ACK-U-M PRECAUTION Read these Operating Instructions carefully and completely before operating the unit. All precautions on this booklet and on the unit should be strictly followed. Keep the Operating Instructions for future reference. Warning To prevent electric shock or injury, these safety instructions should be followed in the installation, use and servicing the unit. [. . . ] Playback skips to the previous or the succeeding track(s) within the program. Changing audio channels (VCDs) Use this function when playing Karaoke VCDs or VCDs with different sound tracks in the left and right channels. Press SHIFT+AUDIO SELECT repeatedly during playback. With each press, the audio channel changes as follows: - Lch: left audio channel is output from both front speakers - Rch: right audio channel is output from both front speakers - STEREO: normal stereo playback ·It is impossible to connect a microphone to this unit and sing along to music sources. ·Audio tracks of DVDs can also be switched. See "Changing audio tracks", page 21. En 2 Press the numbered button(s) on the remote control for the track to be played first. To select track 12, press +10, 2. To select track 20, press +10, +10, 0. 3 Repeat step 2 to program other tracks. 4 Press c to start playback. The programmed tracks are played back in the order of entry. When programmed playback is complete or when s is pressed to stop playback, the program display reappears. ·For VCDs with PBC, turn off PBC first (see "Disabling PBC", page 16). ·During programmed playback, you cannot select a track with the numbered buttons. ·If the total playing time of the program exceeds 99 minutes and 59 seconds, the playing time is displayed as "- -:- -". At this point, the program is not cleared. Pressing c will restart programmed playback from the first programmed track. Random playback (CDs and VCDs only) Tracks can be played back randomly. 1 Press SHIFT+RANDOM/PRGM repeatedly on the remote control to display "RANDOM" on the unit's display. "RANDOM" appears on the TV screen. 2 Press c to start playback. To cancel random playback Press SHIFT+RANDOM/PRGM once on the remote control. "OFF" appears on the TV screen and "RANDOM" disappears on the unit's display. ·For VCDs with PBC, turn off PBC first (see "Disabling PBC", page 16). 19 PLAYING DISCS--DVD FEATURES To recall a marked point 1 Press SHIFT+MARK to enter the mark mode. 2 Press Bb to move the cursor or press a number button for the memory (1 - 5) to select the desired mark memory. Playback starts from the recalled point. Chapter search Specify the playback location of a DVD by the chapter number. 1 Press SHIFT+T-SEARCH twice. 2 Press the numbered button(s) for the desired chapter number, or press vV to change the displayed chapter number. Example: To play chapter number 7, press 7. To play chapter number 20, press +10, +10, 0. If needed, press Bb to move the cursor to or from the title number. En To clear a marked point 1 Press SHIFT+MARK to enter the mark mode. 2 Press Bb to move the cursor or press a number button for the memory (1 - 5) to select the desired mark memory. 4 Press SHIFT+MARK again to exit the mark mode. ·A marked point is recalled with the subtitle and audio language setting at the time it was marked, regardless of possible later changes to the setting. [. . . ] If the power cannot be turned off, disconnect the AC power cord, then plug it in again. Everything stored in memory after purchase is cleared. Resetting DVD setup If trouble concerning DVD playback is not fixed with the troubleshooting tips mentioned above, or if you want to reset the DVD setup to default for any other reason, reset as follows: 1 Press DVD/CD. Release when "CLEAR" appears on the unit's display. [. . . ]