User manual SONY CXLFA500

[. . . ] 4-247-459-21 030108AMI-H-B Micro Hi-Fi Component System XR-FA500 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] *The unit identifies TRAFFIC with one of the PTYs. Program Service station name (PS) The station name is displayed automatically when an RDS station is tuned in. Radio Text (RT) You can show text information such as the title of a song on the display. Press RDS repeatedly when tuning in to an RDS station. If the tuned station is not transmitting text information, "NO RT" will be displayed. To return to the regular display Press RDS again. 11 PTY Search The unit can search for a station broadcasting your desired PTY easily. To do so, you need to preset every available station in advance since the unit searches only the preset stations. 1 Press RDS repeatedly until the program type of the currentry tuned station is displayed. 2 Press f or g to select a desired program type and then press ENTER on the remote. The search begins, stops when a suitable station is detected, and the unit tunes it in. "NOT FOUND" is displayed if a suitable station is not found, and the unit returns to the previous station. If there is no button input for 6 seconds in step 2, the search is not activated. INFO Search The unit can leap to a station which has just started broadcasting your desired PTY. In INFO Search, the unit is in standby mode until the desired PTY begins. As soon as it begins, the unit "leaps to" another station with the PTY and returns to the previously tuned station when it ends. INFO Search makes the function above possible with the help of INFO which gives the receivers a cross reference to other stations. You need to preset every available station in advance since the unit searches only the preset stations. 1 Tune in an RDS station. If "INFO" lights up, proceed to the next step. If not, try to tune in another RDS station until it does. To cancel the standby mode for INFO search Press RDS repeatedly so that "INFO PTY" and the specified PTY are displayed alternately. ·The standby mode for INFO Search will not be cancelled even if the unit is turned off. Note on PTY & INFO Search PTY & INFO Search do not function under the following conditions: - FM stations are not preset. - The signals of the station broadcasting the desired PTY are weak. - FM RDS stations cannot be received. Tip: If TRAFFIC is selected , the unit searches for a station which regularly broadcasts traffic announcements. Therefore, a detected station may not be currently broadcasting traffic announcements. You will, however, be able to hear the announcements in a while. 2 Press RDS repeatedly so that "INFO PTY" is displayed. 3 Press f or g to select a desired program type and then press ENTER on the remote. "INFO ON" is displayed for 2 seconds and then the unit enters the standby mode while "INFO" flashes. When the unit leaps to another station, "INFO" flashes rapidly. If there is no button input for 6 seconds in step 3, the search is not activated. To stay to the "leaped to" station Press CLEAR on the remote. The standby mode for INFO Search is also cancelled. To return to the previously tuned station from the "leaped to" station Press RDS repeatedly so that "INFO PTY" and the specified PTY are displayed alternately. [. . . ] ·The CD is not lying flat in the disc compartment. ·The CD is inserted label side down. ·Moisture condensation has built up. Remove the CD and leave the system turned on for about an hour until the moisture evaporates. Speakers Sound comes from one channel or unbalanced left and right volume occurs. [. . . ]