User manual SONY CXLM171

[. . . ] 2 Heat -- Do not use this unit near sources of heat, including heating vents, stoves, or other appliances that generate heat. It also should not be placed in temperatures less than 5°C (41°F) or greater than 35°C (95°F). 3 Mounting surface -- Place the unit on a flat, even surface. 4 Ventilation -- The unit should be situated with adequate space around it so that proper heat ventilation is assured. [. . . ] zOPEN/CLOSE Opens or closes the disc compartment. 1 POWER 6STANDBY/ON Switches the unit on and off (standby). Radio: stores the received station to preset. r/f/­, +/g/t ( TUNING) CD: skips to a previous or a succeeding track when pressed, searches a track in fast forward or reverse playback when held down. Radio: manually tunes up or down within the band. 6 Remote control 2 The numbered buttons take on these functions when pressed with SHIFT held down: 6 POWER 7 TUNER/BAND Selects radio function and the radio band. AUX Selects the function of external equipment connected to the AUX/VIDEO IN jacks. 8 EQ/QSURROUND EQ: selects a sound equalization curve. 9 ENTER Determines the mode and the time (clock and timer). 0 VOLUME (N, M) 1, 2 3 4 5 6 7 8 9 0 RANDOM/REPEAT Selects random or repeat CD playback mode. PROGRAM Selects programmed CD playback mode. DISPLAY CD: displays the track number being played, remaining time of play and current volume level. Radio: displays the frequency of the tuned station and current volume level. To repeat a selected set of tracks First select the tracks with programmed playback. (See "Programmed playback" on page 11. ) En SHIFT f, g cPRESET aSET sCLEAR VOLUME (N, M) zOPEN/CLOSE FUNCTION This unit plays back finalized CD-R/RW discs as well as audio CDs. Press f or g repeatedly. To search (playback in fast forward or reverse) Hold down f or g. To select a track with the remote control (Direct play) Press the numbered buttons to select a track. - To select track 25, press +10, +10 and 5. To change the display in the playback mode Hold down SHIFT and press DISPLAY on the remote control during playback. The display changes in the following order: 1 Track number being played and elapsed playing time 2 Track number being played and remaining time of play 3 Current volume level ·Remaining playback time cannot be displayed during random playback or programmed playback. Playback 1 Press FUNCTION repeatedly (CD on the remote control) to select the CD function. 2 Press z OPEN/CLOSE to open the disc compartment. Place a disc with the label side up. Then close the disc compartment by pressing zOPEN/ CLOSE. 3 Press c to start play. To stop playback Press s. To skip to the beginning of the current/preceding/ succeeding track 10 Programmed playback Plays back up to 30 selected tracks in programmed order. 1 Hold down SHIFT and press PROGRAM on the remote control in stop mode. "PRGM" flashes on the display. To check the program Press f or g repeatedly in stop mode. The track number and program number are displayed in succession. [. . . ] Do not keep it in hot or humid places. En 6 Adjust the volume and tone for timer playback. If the volume level is set to 17 or higher, it is automatically turned down to 16 when the unit is turned on by the timer. 7 Prepare the source. To play CD, insert a disc. To play the radio, select the band and tune in the desired station. To play external equipment connected to the AUX/VIDEO IN jacks, set an external timer for the equipment so that its playback begins at the same time. Tip: Your timer setting is retained even if the timer is canceled. Next time the timer is activated, you can change your previous setting, or simply use the same setting again. Troubleshooting If your unit fails to perform properly, check the following guide and the relevant sections of this manual. There is no sound ·Are the speakers and AC power cord connected properly? [. . . ]