User manual SONY CXNA50

[. . . ] aiwa(1) COMPACT DISC STEREO SYSTEM CX-NA50 - For NSX-A54 and NSX-A50 OPERATING INSTRUCTIONS For Assistance and Information Call Toll Free 1-800-BUY-AIWA (United States and Puerto Rico) English pg. 1 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. "CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER TO QUALIFIED SERVICE PERSONNEL. " Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's inclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Owner's record For your convenience, record the model number and serial number (you will find them on the rear of your set) in the space provided below. [. . . ] 4 Press the z REC/REC MUTE button to start the erasure. RECORDING (cont. ) DUBBING A TAPE MANUALLY pg. 14 NOTE · Set the tape to the point where recording will start. · The reverse mode is automatically set to . Note that recording will be done on one side of the tape only. 1 Press the TAPE button. 2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2. Insert the tapes with the sides to be played back or recorded on first facing out from the unit. 3 Press the TAPE/DECK 1/2 button to select deck 1. 4 Press the z REC/REC MUTE button to start recording. Playing and recording start simultaneously. Press the button. DUBBING THE WHOLE TAPE This function allows you to make exact copies of both sides of the original tape. The reverse side of both tapes will start simultaneously as soon as the longer tape has been reversed. NOTE · Dubbing does not start from a point halfway in the tape. · The reverse mode is automatically set to . 2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2. Insert each tape with the side to be played back or recorded on first facing out from the unit. 3 Press the SYNCHRO DUBBING button once or twice to start recording. For recording at normal speed, press it once to display NORM-DUB For recording at high speed, press it twice to display HIGH-DUB. c d The tapes are rewound to the beginning of the front sides, and recording starts. NOTE Recording does not start, if the erasure prevention tab on either side of the tape is broken off. RECORDING (cont. ) AI EDIT RECORDING pg. 15 The AI edit function enables CD recording without worrying about tape length and track length. When a CD is inserted, the unit automatically calculates the total track length. If necessary, the order of tracks is rearranged so that no track is cut short. (AI: Artificial Intelligence) NOTE AI edit recording will not start from a point halfway into the tape. [. . . ] · Is the erasure prevention tab on the tape broken off?( page 12) · Is the recording head dirty?( page 22) Erasure is not possible · Is the erasure head dirty?( page 22) · Is a metal tape being used? [. . . ]