User manual SONY CXS-G2516FS INSTALL GUIDE

[. . . ] 2-671-282-11 (1) Specifications Speaker Coaxial 2-way: Woofer 16 cm, HOP, cone type Tweeter 4 cm, Al, cone type 190 W 40 W 4 90 dB/W/m 35 ­ 22, 000 Hz Approx. [. . . ] Keep the following in mind when choosing a mounting location: ·Make sure that nothing is obstructing around the mounting location of the door (front or rear) where you are to mount the speaker. ·A hole for mounting may already be cut out of the inner panel of the door (front or rear). In this case, you need to modify the board only. ·If you are to mount this speaker system in the door (front or rear), make sure that the speaker terminals, frame or magnet do not interfere with any inner parts, such as the window mechanism in the door (when you open or close the window), etc. Also make sure that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, arm rests, door pockets, lamps or seats etc. Mounting from the car interior/ Montaje desde el interior del automóvil/ 1 · · · Mark the 4 bolt holes and make them 3. 3 mm* in diameter. Marque los orificios de los 4 pernos y hágalos de 3, 3 mm* de diámetro. * * When using 4 : ø 5 mm * Si utiliza 4 : ø 5 mm * 4 ø Door panel Panel de la puerta 1 ø 126 mm c 2 Remove the grille net. Extraiga la red de la rejilla. ø 3. 3 mm* Antes del montaje Para montar el altavoz de modo que quede empotrado en la ubicación de montaje se requiere una profundidad mínima de 44 mm. [. . . ] Cómo extraer la red de la rejilla. [. . . ]